Help me choose
Find the robots that fit your purpose, budget, skill and privacy needs among open, educational and companion robots, and compare price, hardware, build guides and research side by side.
Help me choose
- Loona: Wheeled pet robot
- EMO: Desktop companion robot
- Eilik: Desktop interactive robot
- EBO X: Home mobile robot
- Moflin: Plush companion robot
- aibo: Robotic dog (ERS‑1000)
- Ropet KAMOMO: Plush pet robot
- Microduck: Small open-source biped
- PhoneBot: Phone-driven low-cost open humanoid (research platform)
- Miko 3: Kids' learning companion robot
- Kebbi Air: Classroom companion robot
- NAO6: Small humanoid social robot
- Reachy Mini: Open-source expressive desktop robot
- Unitree Go2 EDU: Quadruped robot (EDU version; 70×31×40 cm standing, about 15 kg with battery)
- Petoi Bittle X: Open-source quadruped kit
- Duckiebot: Self-driving teaching robot
- TurtleBot 4: ROS 2 teaching mobile robot
- SO‑101 arm: Open-source low-cost arm
- LeKiwi: Open-source low-cost mobile manipulator
- XLeRobot: Open-source dual-arm mobile home robot
- ToddlerBot: Open-source small humanoid
- Berkeley Humanoid Lite: Open-source humanoid
- Stack-chan: Open-source desktop communication robot (M5Stack controller on a two-servo pan-tilt)
- XiaoZhi AI (xiaozhi-esp32): ESP32 LLM voice-chat firmware that can drive desktop robot bodies
- ElectronBot: Mini USB desktop robot (6 DoF, styled after EVE from WALL‑E)
- Otto (Otto DIY / HP Robots Otto): 3D-printable open-source educational biped
- Shanmao AI desktop humanoid (Otto-based): XiaoZhi-powered desktop biped (derived from Otto DIY)
- Vector 2.0: Tracked desktop AI companion robot
- LOOI Robot: Phone-powered desktop robot (magnetic base plus a smartphone)
- Doly: Open-source tracked desktop companion (Raspberry Pi CM4)
- Thymio (Thymio II / Wireless Thymio): Ready-to-use two-wheeled educational mobile robot (open hardware)
- Mini Pupper 2: Open-source ROS 2 robot dog kit (Raspberry Pi CM4, 209×109×145 mm, 465 g)
- ESP-SparkBot: ESP32-S3 LLM desktop AI robot (snaps onto a magnetic tracked chassis to become an RC car)
- Sesame Robot (Sesame Robot Project): 3D-printed open-source mini quadruped desk robot (8 servos + OLED face)
- pib (printable intelligent bot): Open-source 3D-printed humanoid upper body (head, torso, two arms and five-finger hands; about 85 cm tall and 12–14 kg, mounted on a bench or stand)
- Stanford Pupper v3: Open-source quadruped robot dog with brushless joints (12 DoF, 3 kg, Raspberry Pi 5)
- Dummy-Robot: Super-compact desktop 6-axis arm (stepper motors with harmonic reducers; the original is CNC aluminium)
- InMoov: Life-size open-source 3D-printed humanoid (the standard build is an upper body on a pole stand, with optional non-motorised legs; far larger than a desk robot)
- TurtleBot3 (Burger / Waffle Pi): Open-source ROS two-wheeled differential-drive robot kit (Burger / Waffle Pi, shipped unassembled)
- OpenMANIPULATOR-X (RM-X52-TNM): Open-source 5-DoF ROS arm kit (4 joints + gripper, five DYNAMIXEL XM430s, shipped unassembled)
- OpenBot (open-source smartphone robot car): Low-cost wheeled robot car with a smartphone as its brain (3D-printed or DIY body, plus ready-to-run vehicles)
- SunFounder PiDog (V1 / V2): Raspberry Pi robot dog kit with an aluminium-alloy frame (12 metal-gear servos; Raspberry Pi sold separately)
- Petoi Nybble Q robot cat (Nybble line): 3D-printed open-source robot cat (11 servos: 8 in the legs, 2 in the head, 1 in the tail; ships pre-assembled)
- Freenove Robot Dog Kit for Raspberry Pi (FNK0050): Raspberry Pi quadruped robot dog kit to assemble (acrylic body, 13 servos: 12 in the legs, 1 in the head)
- reBot Arm B601 (reBot-DevArm, B601-DM): 6+1 DoF open-source desktop robot arm (7 Damiao CAN brushless joint motors, 767 mm reach, about 4.7 kg)
- myCobot 280 Pi (myCobot 280 Raspberry Pi 2023): Desktop 6-axis education arm (built-in Raspberry Pi 4B; 280 mm reach, 250 g payload, 860 g)
- HopeJR (HOPEJr): Full-size open-source DIY humanoid (3D-printed parts with off-the-shelf servos and tendon-driven dexterous hands); what can be built from the files today is the LeRobot-integrated arm + hand with an exoskeleton teleop kit, while the full body and legs are still drafts
- Amazing Hand (AH!): Open-source 3D-printed humanoid robot hand — a hand only, not a whole robot: 4 fingers, 8 DoF, all 8 servos inside the hand, about 400 g; the wrist interface is made for Reachy 2's wrist, with a community SO-ARM adapter
- Blossom (handcrafted open-source social robot): Handcrafted soft social robot: motors at the base of a tower pull cables on a head platform hung from rubber bands, under a hand-knitted cover
- XGO-lite3 (education model of the XGO series): Desktop quadruped robot dog with a 3-DoF arm and gripper (Raspberry Pi CM5, 15 DoF in all, 610 g)
- BamBot (bambot-b0): 3D-printed low-cost wheeled two-arm “humanoid”: two SO‑100-style arms on a three-omni-wheel base, 15 STS3215 servos in all (the creator calls it a low-cost humanoid)
- TRLC-DK1 (The Robot Learning Company Developer Kit 1): Leader-follower arm dev kit: a passive leader arm (seven Dynamixel XL330s) drives a follower with six joints and a gripper (Damiao DM4340/DM4310 brushless motors on CAN); single-arm or bimanual
- AlohaMini (AlohaMini2 / AlohaMini 1): 3D-printed dual-arm mobile robot: a three-omni-wheel base with a motorized lift and two 6+1-DoF arms (AM‑ARM200 on AlohaMini2, SO‑ARM100/101 on the first generation), with five cameras
- LeLamp (open-source expressive robot lamp): Open-source expressive robot lamp: five serial bus servos drive a 5-DoF lamp arm, with an LED matrix and speaker in the head and a Raspberry Pi in the base
- Coglet (desktop companion robot): 3D-printed DIY desktop companion robot: nine servos move the ears, eyelid, mouth, eyes and neck, with camera face tracking and LLM voice chat
- nanosaur (open-source NVIDIA Jetson dinosaur robot): Fully 3D-printable tracked desktop mobile robot (NVIDIA Jetson, a camera and two OLED eyes)
- MeArm (pocket-sized robot arm): Flat-pack laser-cut acrylic 4-DoF desktop servo robot arm
- Q8bot miniature quadruped: Smartphone-sized 8-DoF quadruped: every part plugs straight into a central PCB, with no wires anywhere
- Open Duck Mini v2 (mini BDX biped): About 42 cm tall 3D-printed biped modelled on Disney's BDX droid (14 STS3215 servos, reinforcement-learned gait)
- Unitree Qmini (3D-printable open-source biped): Small biped whose structure is entirely FDM 3D-printed (11 Unitree 8010 motors, Raspberry Pi 4B control)
- Upkie open-source wheeled biped: Self-balancing wheeled biped with wheels at the ends of its legs: wheels for balance, legs for uneven ground (6 mjbots brushless actuators, Raspberry Pi 4B)
- ORCA Hand (orcahand v2): Open-source tendon-driven five-finger dexterous hand — a hand only, not a whole robot: 17 DoF (16 tendon-driven finger joints plus a belt-driven wrist), 17 serial-bus servos, about 1.1 kg, mounted on a collaborative arm's ISO 9409-1 flange
- OpenArm 2.0 (open-source humanoid arms): Open-source 7-DoF humanoid arm, sold as a left-right pair (14 DoF) with two-finger grippers; DAMIAO joint motors on 1 kHz CAN‑FD, about 5.5 kg per arm, 4.1 / 6.0 kg nominal / peak payload
- Koch v1.1 low-cost robot arm (leader/follower pair): Dynamixel-servo desktop arm used as a pair, a leader moved by hand and a follower that acts: 5 joints plus a gripper, 6 servos per arm, 3D-printed structure
- ESP-Hi AI chat robot dog: Ultra-low-cost ESP32-C3 AI chat robot dog (a head with a 0.96-inch colour screen on a four-servo base, joined by USB‑C)
- EDA-Robot dog: ESP8266 beginner soldering course robot dog (4 servos, a 0.96-inch OLED face, a through-hole PCB of 48×87 mm)
- Roboto Origin (RPO): 1.25 m fully open-source, hand-built biped humanoid (23 DoF, 34 kg, CNC-machined metal frame, 48V DM-series joint motors)
- JPL Open Source Rover (OSR): Build-it-yourself six-wheel rover scaled down from JPL's Mars rovers (rocker-bogie suspension, aluminium frame, Raspberry Pi brain)
- NVIDIA JetBot (Jetson Nano AI education robot): Two-wheeled differential-drive AI robot with a Jetson Nano as its brain (3D-printed chassis and a wide-angle camera, open reference design)
- Andino (Ekumen's open-source ROS 2 education robot): Two-wheeled differential-drive mobile robot with a 3D-printed chassis (Raspberry Pi 4B + Arduino, lidar, camera and IMU)
- T-Top (tabletop socially assistive robot): Open-source tabletop socially assistive robot for research: a Stewart platform carries a 7-inch touchscreen face on a base that turns without limit, with an NVIDIA Jetson AGX, a 16-microphone array and RGB‑D and wide-angle cameras in the torso
- AKARI (small desktop AI camera robot): Open-source small desktop robot: one two-axis Dynamixel module pans and tilts a head built around an OAK‑D Lite AI camera, with an M5Stack screen and a LattePanda Alpha computer in the body; a cheaper AKARI Light uses a Raspberry Pi 5 and Feetech servos
- Peeqo (GIF-speaking desktop companion robot): Voice-activated desktop companion that answers almost entirely in GIFs and short videos: a screen in the head shows eyes and GIFs, a three-servo Stewart-style platform nods and tilts the head, with an LED ring, speaker, microphone and buttons, a Raspberry Pi inside and a cloth cover
- Tiny Engineer (a desk robot that gives an AI coding agent a body): A small 3D-printed robot seated at a desk with a laptop, mug, lamp and service bell: five micro servos move the head (pitch), neck (yaw), body and both hands, a 0.91-inch OLED shows the eyes, and a speaker plays cues and speech
- Maker's Pet Mini (LiDAR ROS 2 education robot): Two-wheel differential-drive robot on a 120 mm round 3D-printed base, about 86 mm tall to the top of the LiDAR: an ESP32 runs Arduino + micro-ROS firmware under a 360° 2D LiDAR, while mapping and navigation run in ROS 2 on a computer on the same Wi‑Fi
- Raspberry Pi Mouse V3 (Raspberry Pi teaching mobile robot): Small two-wheeled mobile platform robot with a Raspberry Pi as its main board (two stepper motors, shipped assembled, 13 cm long)
- Bumperbot (the self-built ROS 2 robot from Antonio Brandi's courses): Two-wheeled differential-drive autonomous mobile robot with a three-deck 3D-printed “waffle plate” chassis (Raspberry Pi 4 + Arduino Nano, lidar and IMU), with a caster front and rear
- Pogobot (swarm robot): A round swarm robot about 55 mm across and 43–56 g: an FPGA softcore brain, with three vibration motors that make it hop along on brushes or legs, or a two-wheel skirt instead
- PingTi Arm (low-cost human-arm-scale robot arm): A lengthened SO‑100 desktop arm: 5 joints plus a gripper driven by 8 Feetech bus servos (the shoulder pairs 2 STS3250s and the elbow pairs 2 STS3215s), with a 3D-printed structure
- K2 (open-source 3D-printed 12-DoF biped): A small 3D-printed biped with no upper body: 12 Feetech STS3215 servos (per leg: hip pitch, roll and yaw, knee, ankle pitch and roll), 0.426 m tall and 1.40 kg, with a reinforcement-learned gait running on a XIAO ESP32-S3 microcontroller
- MiniLoong (Qinglong Mini, RL-Boy) small humanoid for reinforcement learning: 22-DoF small humanoid: 5 joints per leg, 1 at the waist, 1 in the head, and 4 joints plus a gripper per arm; brushless joint motors, a structure of carbon-fibre plate, aluminium parts and 3D prints, and an ESP32-driven OLED face
- JBR-001 (open-source desktop companion robot): A small 3D-printable desktop companion robot: an Arduino UNO Q controller and 3 servos, one turning the head horizontally and one for each arm, a camera in the head, a distance sensor at the back of the head and a buzzer; the repo holds 80 STL print files
- LEAP ROS2 (low-cost open ROS 2 learning car: LEAP_ROS / LEAP_ROS_MAX): A ROS 2 learning car built around an ESP32-S3 driver board with lidar, ultrasonic sensing and a Wi‑Fi camera, in two configurations: LEAP_ROS is a two-wheel differential base (65 mm wheels, 131.7 mm track, 4680 encoder counts per turn) and LEAP_ROS_MAX a four-wheel mecanum base. Overall size and weight are not given
- LeRobot Humanoid biped platform (Hugging Face's open low-cost humanoid): Open-source biped platform built mostly from 3D-printed parts, currently legs and pelvis only: 12 DoF (hip z, hip x, hip y, knee, ankle x and ankle y per leg), 12 RobStride joint motors, a linkage-driven knee and an ankle driven by two shin motors through ball-joint rod-end linkages, with a Raspberry Pi 5 on the torso (pelvis). The official pages give no height or weight: the creators' no-arms model (URDF/MJCF) sums to 12.7 kg across its links, and the training config starts the standing pose with the torso frame 0.75 m above the ground
- NanoLoong (small teaching biped, from OpenTinker V2): A 60 cm brushless-motor biped styled after Pixar's lamp robot and Disney's BDX: five joints per leg (10 actuated joints in the URDF and the RL config) and a lamp-like head on a neck, built from carbon-fibre plates, machined aluminium parts and 3D prints, with a reinforcement-learned gait running on an on-board Odroid C4. Weight is not given
- PAROL6 3D-printed desktop 6-axis robot arm: A desktop arm with 6 revolute joints: one NEMA 17 stepper per joint, driven through planetary gearboxes (joints 2, 3, 6) and HTD3 belts (joints 1, 3, 4, 5), with PETG printed links on steel shafts and bearings; the manual gives a 408 mm reach (to the flange; 434 mm to the standard pneumatic gripper's TCP), a payload of 1 kg near the base and 0.5 kg across the full workspace (tool included), 0.1 mm repeatability and 5.5 kg, with no joint encoders and no brakes
- PlayBot (open dock that turns a Playdate handheld into a desktop robot): Unofficial two-wheel desktop robot dock for Panic's Playdate handheld: the console slots in as the head and shows the face, an SG90 servo moves it through a push rod, two N20 gearmotors with encoders and two mini ball casters carry it, a Teensy 4.1 runs the hardware on a 1S LiPo, and the whole body is 3D printed (5 STLs). The dock also charges the console. Overall size and weight are not given
- RoBart LLM-controlled iPhone and hoverboard robot: A mobile base made from a salvaged hoverboard: a Hover-1 H1 with its plastic shell and original electronics removed, a 2020 aluminium-extrusion frame with a rear caster, and a 3D-printed holder atop a vertical extrusion carrying an iPhone Pro for compute and sensors; the hoverboard's 36V battery powers two RioRand 350W brushless drivers for the hub motors, and an Adafruit Feather nRF52 takes throttle commands from the iPhone over Bluetooth LE; the mast splits at a removable connector so the robot fits in a car trunk. The creator gives no size or weight
- TARS-AI (AI recreation of TARS from Interstellar): A 3D-printed recreation of TARS, the robot from the film Interstellar: a torso and two legs, with 4 MG996R servos in V3 lifting and swinging the legs (each leg can lift on its own); the arms version fits an arm into each leg and adds 2 MG996R and 4 MG90S servos; a Raspberry Pi 5, a 5-inch DSI screen, an OV5647 camera and a 12V Li-ion battery
- Thor open-source 3D-printed 6-DoF robot arm: A 6-DoF 3D-printed arm in the yaw-roll-roll-yaw-roll-yaw configuration most industrial arms use: seven NEMA 17 steppers (three with 5:1 reduction for joints 2 and 3) with 3D-printed gears, GT2 belts and a semi-differential wrist, and an MG995 servo for the gripper; the README gives 625 mm stretched height (without end effector) and a 750 g maximum payload (end effector included), and the creator's drawing gives a 202 mm base and axis spacings of 160 mm, 195 mm and 67.15 mm (about 422 mm from shoulder axis to tool flange)
- Viam Rover (open-design learning rover: Viam Rover 2 / Rover 1): A preassembled two-wheel-drive small rover: an anodized aluminium chassis 29.5 cm long, 22 cm wide and 7 cm high, weighing 2.2 kg, with two encoded motors with suspension plus two casters, a mounting hole pattern for expansion and up to a 20 lb payload indoors; a separately bought Raspberry Pi 4 is the controller
- UBTECH Alpha Mini (Wukong): Portable small humanoid robot (14 DoF, 245 mm tall, about 700 g)
- DJI RoboMaster EP Core (RoboMaster S1 Education Expansion Set Core): Mecanum-wheel omnidirectional education robot with a 2-axis arm and gripper (about 3.3 kg)
- Makeblock mBot2 (formerly mBot Neo): Aluminium two-wheeled coding robot kit (CyberPi controller, 90×180×130 mm)
- Alpha Egg Go robot: Children's Go robot with a 3-DoF arm and a 10.1-inch screen (real board, vacuum pick-and-place)
- Xiaomi CyberDog 2 bionic quadruped robot: Consumer bionic robot dog (12 DoF, about 8.9 kg, Ubuntu 18.04 + ROS 2)
- WEILAN AlphaDog BabyAlpha A2: Home AI companion quadruped robot dog (12 actuators)
- Fuzozo AI pet: Palm-sized plush AI pet (about 140 g, clips onto a bag; the body does not move and responds with expressive eyes and touch-triggered vibration)
- QingLoong, OpenLoong's full-size open-source reference humanoid: A full-size humanoid 1,850 mm tall, 2,192 mm across the outstretched arms and 300 mm deep, weighing 80 kg; 43 active DoF (head 2, legs 6×2, waist 3, arms 7×2, dexterous hands 6×2), up to 396 N·m of peak joint torque, an EtherCAT bus and a 72V (19S) battery of at least 30 Ah (hardware open-source PDF)
- AgiBot X1 full-stack open-source humanoid: A modular humanoid 130 cm tall and 33 kg: the Chinese product page gives 31 active DoF and the English page 34; the development guide lists 29 joints (R86-2 ×9, R86-3 ×6, R52 ×10, L28 linear actuators ×4) plus 2 grippers, with 3 optional DoF in the head; 48V PowerFlow joints, 2 h of runtime, up to 1 m/s walking and 0.5 kg per arm (product page)
- Asimov 1 open-source humanoid (Menlo Research): 1.2 m, 35 kg full-size biped humanoid: 25 powered joints (6 per leg, 5 per arm, 1 waist, 2 neck), 7075 aluminium and MJF PA12 nylon structure, sold as an unassembled DIY kit; 5 / 15 kg rated / peak load per arm (6 / 18 kg in a lateral raise), joint peak torque up to 120 N·m, a 491 Wh battery; no hands yet
- AhaRobot low-cost open-source bimanual mobile manipulator (Astra hardware): A bimanual mobile manipulator, not a humanoid: a differential-drive base (two hub motors and a caster) carries a vertical lifting rail (1250 mm of travel), with two horizontally mounted servo arms and a head pan-tilt on the rail; 51 kg and 550×500×1550 mm overall, 1.5 kg payload per arm, 750 mm maximum reach in the horizontal plane, 120 mm maximum gripper opening, zero turning radius, 4–5 hours of battery life and 16 DoF in all (project website)
- Roomi open-source cleaning and housekeeping robot: Cart-style mobile manipulator: a storage cart on two driven wheels (two geared NEMA 23 steppers) and casters, carrying one long arm (5 DoF per the README, 0.95 m reach per the demo video's caption) whose joints are closed-loop steppers with AS5600 encoders, with two OLED eyes on the head; the creators give no footprint, height, weight or payload
- Barkour agile quadruped (Google DeepMind, vB): Electric agile quadruped of about 14 kg (vB: 12 modified T‑Motor AK80‑9 joint motors on EtherCAT, a 3D-printed nylon torso, a 60V DeWalt battery), with a fixed head or an actuated head with a mouth gripper; the earlier v0 used in the paper weighs 11.5 kg, with 220 mm upper and 190 mm lower legs, 380 mm between front and rear hips and 290 mm between left and right legs
- NavBot-D1 open-source quadruped robot dog: 12-DoF electric quadruped robot dog (12 DaMiao DM6248P joint motors, an aluminium frame with CNC and sheet-metal parts, a Jetson Orin Nano Super controller); the store page and READMEs give no size or weight, the MuJoCo model in D1_rl_sar sums to about 14.7 kg with 0.2 m upper legs, and the creator's article cites a 25 kg payload
- Mujina (ムジナ) research-and-development quadruped: RT's in-house 12-DoF electric quadruped (three joint motors per leg, set up in the assembly docs as RobStride RS02; a LattePanda IOTA computer inside); RT's pages give no size or weight, and the MuJoCo model in mujina_ros, built from the CAD's physical properties, sums to about 11.7 kg with 0.2 m upper and lower legs
- Panthera-HT open-source 6-axis robot arm: 6-DoF joint-motor arm with a 1-DoF gripper: HighTorque planetary joint modules on an aluminium sheet-metal frame; 4.35 kg net, 3.5 kg maximum load, 860 mm arm span (the manual's spec list calls it standing height, and the store's dimension drawing shows it as the fully stretched length), 460 mm folded, 0.8 m/s top end-effector speed, 36 N·m peak joint torque and 0.1 mm repeatability
- Manuel 1.0 (open-source human-arm-scale robot arm): Human-arm-scale open-source 6-DoF arm plus a gripper: 7 Robotis Dynamixel X-series servos, 3D-printed PLA joints and gears on 4040 aluminium-extrusion links; 860 mm from shoulder to gripper tip and a 1 kg payload when extended (README)
- CM6 compliant 3D-printed cobot arm: 6-axis 3D-printed cobot arm: six gimbal BLDC motors on low-ratio (5:1–9:1) printed planetary gearboxes (quasi-direct drive, passively compliant) with aluminium-extrusion links; the Hackaday spec list gives 5 kg and a 3 kg maximum load (at limited reach); the repo's DH model has a 280 mm upper arm, 250 mm forearm and 37.2 mm wrist (about 567 mm from shoulder to flange when stretched), while the reach field is left blank
- Sawppy the Rover: Six-wheel motorized model of Curiosity and Perseverance (rocker-bogie suspension, six-wheel drive and four-wheel steering, 15 mm aluminium extrusions joined by 3D-printed connectors, ten serial bus servos). The body box uses 385 mm (lengthwise) and 245 mm (widthwise) beams and the wheels are 120 mm across; the creator says it is roughly the size of JPL's Open Source Rover with a payload bay sized for a 15-inch laptop, and gives no overall length, width, height or weight
- Faze4 3D-printed 6-axis arm with cycloidal gearboxes: A 6-axis 3D-printed arm styled after FANUC's LR Mate 200iD: six steppers (three NEMA 23, two NEMA 17 and one NEMA 14 with a 19:1 planetary gearbox), 3D-printed cycloidal reducers (11:1, 15:1, 27:1) plus belts on joints 1–5, and every wire hidden inside the arm; the official video description gives a 70 cm reach and about 15 kg, the docs say 14–15 kg (less with lower infill), and the link lengths are L1 236.82 mm, L2 320 mm, L3 73.5 mm, L4 250.7 mm and L5 57 mm; no payload is given
- MEVIUS sheet-metal welded quadruped: A 12-DoF electric metal quadruped: three T-Motor AK70-10s per leg (10:1 gearing, 25 N·m maximum torque in the paper); the body and hip links are welded A5052 sheet metal, the thigh, calf-base and other parts machined A7075, and only the calf link is 3D-printed in POTICON, a nylon-based compound. The paper gives 15.5 kg and 0.25 m legs; RT's made-to-order version is 680×380×500 mm standing, 780×380×195 mm lying down and about 16 kg with battery