Connecting to sources…

Pogobot (swarm robot) · A round swarm robot about 55 mm across and 43–56 g: an FPGA softcore brain, with three vibration motors that make it hop along on brushes or legs, or a two-wheel skirt instead

A round swarm robot about 55 mm across and 43–56 g: an FPGA softcore brain, with three vibration motors that make it hop along on brushes or legs, or a two-whe…

Maker
Open-source project of ISIR, Sorbonne Université (CNRS), with the Gulliver Lab at ESPCI Paris‑PSL
Form
A round swarm robot about 55 mm across and 43–56 g: an FPGA softcore brain, with three vibration motors that make it hop along on brushes or legs, or a two-wheel skirt instead
For
Researchers in swarm robotics and (programmable) active matter (the paper says more than 200 are in daily use at several universities); the P‑ANDROIDE project team of January–May 2023 also built swarm algorithms on it and posted its defence video
Sensors
4 infrared transceivers (per direction two emitters and one receiver, TS4231 chips, 1–10 MHz optical carrier), 3 ambient light sensors (front-left, front-right, back), a 6-axis IMU and a battery-voltage reading; 5 RGB LEDs (one on the head, four on the belly facing each direction); no camera or microphone (paper annex and software guide)
Connectivity and app
No app and no Wi‑Fi or Bluetooth: robots talk to each other only over infrared (up to about 400 bytes per message). Programs are compiled with make on Linux and uploaded to one robot through a USB‑UART programming board and an 8-pin FFC cable, or to a whole group at once with the PogoShower infrared uploader (10 IR emitters, about 50 cm range), which also starts them
Subscription
Self-built open source with no subscription
Openness
The main repo's LICENSE is MIT (Expat), copyright 2022 Sorbonne Université ISIR; an extra line in the file makes GitHub report NOASSERTION. The repo holds KiCad 6 schematics and PCBs for the head, belly, charger, IR remotes and IR wall, STL print sets for Pogobot 2023 and 2026, and the FPGA gateware, pogobios and pogolib sources; the hardware has no separate licence (the MIT text speaks of “software”). The SDK repo is MIT (copyright 2022 Nicolas Bredeche); the Pogosim simulator, pogo-utils and the pogotrack tracking software have no licence file. The website says the project is open source and open hardware, free to use, modify and fork
Privacy
No camera, microphone, Wi‑Fi or Bluetooth; the robot communicates only over infrared and a USB cable. Data handling is not described.
Not stated
Price (not sold), itemised BOM cost, vibration motor model (the repo gives only an eBay link), recommended age, CNY price, licences of Pogosim and the other companion repos

Vendor claims

  • An open-source, open-hardware small swarm robot, meant as an improved replacement for the discontinued Kilobot
  • Fast four-way infrared communication (1–10 MHz carrier) that tells a robot roughly where a sender is
  • About €250 per assembled robot, with more than 200 in daily use at several universities
  • Programmed in C and flashed a whole group at a time over infrared, with the same code running unchanged in the Pogosim simulator

Parts

  • iCE40LP8K · FPGA chip integrating a softcore processor
  • iCE40UP5K · Main FPGA with an integrated softcore processor
  • esp8266 · Provides wireless communication and robot control
  • TSAL6200 · Provides infrared remote communication
  • VSM3940x01 · Emits infrared light for the IR wall
  • 90224-AS · Charging connector for robot power pads
  • UMFT234XF · USB-to-UART programming interface
Parts and sources

Sources