Connecting to sources…

HopeJR (HOPEJr) · Full-size open-source DIY humanoid (3D-printed parts with off-the-shelf servos and tendon-driven dexterous hands); what can be built from the files today is the LeRobot-integrated arm + hand with an exoskeleton teleop kit, while the full body and legs are still drafts

Full-size open-source DIY humanoid (3D-printed parts with off-the-shelf servos and tendon-driven dexterous hands); what can be built from the files today is th…

Maker
Open-source project by The Robot Studio (Rob Knight) and Hugging Face (LeRobot team)
Form
Full-size open-source DIY humanoid (3D-printed parts with off-the-shelf servos and tendon-driven dexterous hands); what can be built from the files today is the LeRobot-integrated arm + hand with an exoskeleton teleop kit, while the full body and legs are still drafts
For
DIY builders and robot-learning researchers (the README aims to put humanoid building within reach of “the masses”)
Sensors
The robot's BOM has no camera or microphone; joint angles come from the Feetech servos' position feedback. The exoskeleton and glove read the operator's joints with SS49E linear Hall sensors (28 in the BOM) and 3 mm diametric magnets; LeRobot's recording example adds a separate 640×480 USB camera
Connectivity and app
No app: arm, hand, glove and exoskeleton each connect to a computer over USB serial, and LeRobot's command-line tools handle calibration, teleoperation (30 fps) and recording; the docs say arm and hand must run in separate shells because of global-variable conflicts in the Feetech middleware. The recording example pushes datasets to the Hugging Face Hub (can be private)
Subscription
Open-source project, no subscription; LeRobot is an Apache‑2.0 library
Openness
Licensing is partial: the repo root has no licence (the GitHub API returns none) and the Humanoid/ folder carries an Apache‑2.0 LICENSE (whose header also says “Copyright 2024 The Robot Studio. All rights reserved.”); the Arm/ folder that holds the current buildable design (STLs, STEP, PCB Gerbers/BOM/placement files, the exoskeleton and glove Arduino code) declares no licence, nor does the upstream nepyope/Project-Homunculus. The LeRobot control software (hope_jr_arm, hope_jr_hand, homunculus_arm, homunculus_glove) is Apache‑2.0
Privacy
No camera or microphone on the robot; LeRobot runs on the local computer, footage from the camera used for recording goes into the dataset, and the example pushes it to the Hugging Face Hub (--dataset.private=true keeps it private).
Not stated
Full-robot price and release date, full-body DoF, height and weight (not on any official page), full-body BOM and cost, arm payload, assembly time, licence for the Arm/ folder and the exoskeleton firmware

Vendor claims

  • A full-size DIY humanoid from 3D-printed parts and off-the-shelf servos, with tendon-driven dexterous hands
  • Exoskeleton and glove teleoperation with 1:1 joint mapping; custom PCBs mean no soldering
  • Integrated with LeRobot for recording, training and inference (the docs call recording and training still experimental)

Parts

  • ESP32-C3 · Processes sensor data and controls the glove
  • SS49E · Detects magnetic fields to measure finger joint angles
  • Robstride 02 · Drives robotic joint motion
  • SCS0009 · Drives hand fingers and thumbs
  • SM8512BL · Drives shoulder pitch motion
  • ST3215 · Drives arm joint motion
  • ST3250 · Drives shoulder pitch with high-torque steel gears
  • STS3215 · Drives robotic arm joints
  • STS3250 · Drives shoulder yaw and elbow flexion
  • STS8215 · Drives arm joints under extra load
  • URT-1 · Controls the arm and connects actuators
Parts and sources

Sources