Unitree Qmini (3D-printable open-source biped) · Small biped whose structure is entirely FDM 3D-printed (11 Unitree 8010 motors, Raspberry Pi 4B control)
Small biped whose structure is entirely FDM 3D-printed (11 Unitree 8010 motors, Raspberry Pi 4B control) · Unitree Robotics · training and deployment software …
- Maker
- Unitree Robotics · training and deployment software by Shandong University VSISLab
- Form
- Small biped whose structure is entirely FDM 3D-printed (11 Unitree 8010 motors, Raspberry Pi 4B control)
- For
- The README lists individual hobbyists, STEM education (robotics competitions, lab experiments, graduation projects), research institutions and interactive entertainment
- Sensors
- The BOM has a single GY-91 attitude module (MPU9250 + BMP280, 10 axes) on top of the body; no camera or microphone. Four 3010 blower fans cool the leg motors and two 4010 fans sit at the front of the body
- Connectivity and app
- A Raspberry Pi 4B drives the 11 motors on 4 buses through a USB-to-4×RS‑485 module; the deployment code is C++ and runs exported policies with ONNX Runtime. The official material does not describe remote control and mentions no app or cloud service
- Subscription
- Open-source project, no subscription
- Openness
- The Qmini repo (STEP models v1.0 and v2.0, URDF, the DIY assembly manual and BOM) carries a CC BY‑NC‑SA 4.0 LICENSE: attribution, share-alike and non-commercial use only, which is why GitHub shows NOASSERTION; every page of the DIY manual also reads “© 2025 Unitree, all rights reserved”. Shandong University VSISLab's training code RoboTamer4Qmini states MIT in its README (the licence file is the MIT text without its title line), and the deployment code RoboTamerSdk4Qmini is MIT; both repos say they are no longer maintained
- Privacy
- No camera or microphone on the robot; control code runs locally on the on-board Raspberry Pi, and the official material mentions no online service.
- Not stated
- Height and weight, battery capacity and runtime, total BOM cost, remote control method, recommended age, Qmini v2.0 changes, Go1 battery price
Vendor claims
- A fully open-sourced, low-cost biped that individuals can 3D print entirely
- Once printed, it assembles in 3–5 hours in modular fashion with Unitree 8010 motors and a standard battery pack
- Suited to STEM education: robotics competitions, lab experiments and graduation projects
Parts
- GO-M8010-6 · Drives joints with position and temperature sensing
- XT30(2+2) · Carries power and signals
Sources
- github.com/unitreerobotics/Qmini
- github.com/unitreerobotics/Qmini/blob/main/LICENSE
- github.com/unitreerobotics/Qmini/blob/main/Qmini_DIY.pdf
- vsislab.github.io/RoboTamer/
- github.com/vsislab/RoboTamer4Qmini
- github.com/vsislab/RoboTamerSdk4Qmini
- unitree.com/contact/
- shop.unitree.com/products/go1-motor
- bilibili.com/video/BV1rqTtzjEcd