Connecting to sources…

OpenMANIPULATOR-X (RM-X52-TNM) · Open-source 5-DoF ROS arm kit (4 joints + gripper, five DYNAMIXEL XM430s, shipped unassembled)

Open-source 5-DoF ROS arm kit (4 joints + gripper, five DYNAMIXEL XM430s, shipped unassembled) · ROBOTIS · The arm carries no camera or other external sensor; …

Maker
ROBOTIS
Form
Open-source 5-DoF ROS arm kit (4 joints + gripper, five DYNAMIXEL XM430s, shipped unassembled)
For
ROS learners and R&D users; mounts on a TurtleBot3 Waffle Pi for mobile manipulation (e-Manual and store page)
Sensors
The arm carries no camera or other external sensor; its five XM430‑W350‑T servos report position, velocity, current, temperature and input voltage. The e-Manual's vision examples need a separately bought RealSense D435/D435i on a self-printed mount
Connectivity and app
A PC reaches the servos over a TTL multidrop bus through a U2D2 (USB to TTL) or an OpenCR, with ROS 2 running on the PC; with an Arduino-programmed OpenCR the arm runs standalone without ROS. The spec table lists only the wired TTL bus, and the manual's workflow involves no app or cloud service
Subscription
Neither the store nor the e-Manual mentions a subscription; the ROS 2 packages are free under Apache‑2.0
Openness
The e-Manual calls it an open-source software and open-source hardware platform, with most parts published as STL files. On GitHub, open_manipulator (ROS 2 packages, URDF and STL meshes, MuJoCo models), the OpenCR firmware (with its OpenManipulator Arduino library) and the DYNAMIXEL SDK are all Apache‑2.0; the printable 3D CAD is a public Onshape document from ROBOTIS OpenSourceTeam with no licence stated, and the Thingiverse copy refused access, so its licence was not read
Privacy
The arm has no camera or microphone and connects to a local PC by USB; the vision examples need an extra camera. The manual's workflow does not use the cloud.
Price
USD 1629.09 (2026-11-22)
Not stated
Recommended age, CNY price, assembly time, licence of the printable 3D files (Onshape and Thingiverse), tax

Vendor claims

  • Controlled through ROS and MoveIt, and runs in the Gazebo simulator without the real robot
  • Most parts are published as STL files to 3D print, with link lengths you can change
  • Fully compatible with TurtleBot3 for mobile manipulation

Parts

  • OpenCR1.0 · Controls the arm through Arduino
  • STM32F746ZGT6 · Runs control firmware and processes robot commands
  • AL422B · Buffers camera frames before OpenCR processes them.
  • D435 · Provides RGB and depth data for manipulator perception.
  • D435i · Provides RGB and depth data for manipulator perception.
  • OV7725 · Supplies camera data to the OpenCR board.
  • AS5045 · Measures joint rotation and provides absolute angle feedback
  • MPU9250 · Measures tri-axis acceleration, angular rate and magnetic field
  • DC12-P-BEARING · Supports idler rotation and reduces friction
  • HN12-I101 · Connects the gripper to its actuator
  • X430 · Provides powered joints for the arm and gripper.
  • XH430 · Provides powered joints for the arm and gripper.
  • XH430-V-series · Provides 24 V-powered joints for the arm.
  • XL430 · Provides powered joints for the arm and gripper.
  • XM430 · Provides powered joints for the arm and gripper.
  • XM430-W350 · Drives manipulator joints with position and velocity control
  • XM430-W350-T · Drives arm joints and gripper
  • 20010WS-02 · Provides a 3.3V power output
  • PS-10 · Provides 12V 5A power to the arm
  • SMPS 12V5A · Provides 12-volt, 5-ampere power
Parts and sources

Sources