AlohaMini (AlohaMini2 / AlohaMini 1) · 3D-printed dual-arm mobile robot: a three-omni-wheel base with a motorized lift and two 6+1-DoF arms (AM‑ARM200 on AlohaMini2, SO‑ARM100/101 on the first generation), with five cameras
3D-printed dual-arm mobile robot: a three-omni-wheel base with a motorized lift and two 6+1-DoF arms (AM‑ARM200 on AlohaMini2, SO‑ARM100/101 on the first gener…
- Maker
- Open-source project by Li Yiteng (liyiteng) and Wu Zhiyong
- Form
- 3D-printed dual-arm mobile robot: a three-omni-wheel base with a motorized lift and two 6+1-DoF arms (AM‑ARM200 on AlohaMini2, SO‑ARM100/101 on the first generation), with five cameras
- For
- Embodied-AI researchers and developers who build their own robots (README: “built for embodied AI research”); the first-generation product table also lists education, makers and home builds
- Sensors
- Five 720p USB cameras (2.4 mm lens): front, back, chest and both wrists; the BOM has no microphone or depth camera. The servos report position and current, and the host uses the current for stall and overload protection
- Connectivity and app
- A Raspberry Pi 5 (2 GB) on the robot is the host for the follower arms, wheels, lift and cameras; a PC client takes the two leader arms, and both must share a LAN (ZMQ messaging). The host runs commands, a watchdog and safety checks at 50 Hz with cameras at 30 Hz; the Pi can be swapped for a Jetson Orin Nano or any SBC with USB 3.0
- Subscription
- Open-source project, no subscription
- Openness
- Apache‑2.0: the AlohaMini repo holds the AlohaMini2 base STLs and STEP files, URDFs (2 and 2 Pro), the BOM and the print and assembly guides, plus the first generation's STLs, STEP files and ROS simulation package; the AM‑ARM200 arm lives in liyiteng/AM-ARM (Apache‑2.0) and the lerobot_alohamini software is a LeRobot fork (Apache‑2.0)
- Privacy
- Footage from the five cameras goes into the LeRobot dataset; the record_bi.py script uploads to the Hugging Face Hub by default and keeps data local only with --dataset.push_to_hub=false. The Pi and the PC talk over the LAN; the BOM has no microphone.
- Not stated
- AlohaMini2 lift travel, overall size and weight, battery life, the creators' location, the Taobao shop price
Vendor claims
- Dual arms, a motorized lift and an omni base, with a self-build BOM under $1,000 (leader arms excluded)
- 70 kg base load, 30 kg lift capacity, 1 kg per arm, 52 cm reach
- Printable on a consumer Bambu P2S, assembled in about 120 minutes, trained and deployed with LeRobot
Parts
- Raspberry Pi 5 · Provides the robot's main onboard computing
- H65V1 · Captures front, rear, chest, and wrist images
- ST-3095-C002 · Drives mobile-base lift and follower-arm joints
- ST-3215-C018 · Drives mobile-base wheels and follower-arm joints
- ST-3215-C046 · Drives the two leader-arm joint sets
- STS-3095 · Drives lift and arm power joints
- STS-3215 · Drives follower arms and mobile base joints
- STS3250 · Controls joint position and monitors stall current
Sources
- github.com/liyiteng/AlohaMini
- github.com/liyiteng/AlohaMini/blob/main/AlohaMini2/docs/BOM.md
- github.com/liyiteng/AlohaMini/blob/main/AlohaMini2/docs/assembly_guide.md
- github.com/liyiteng/AlohaMini/blob/main/AlohaMini2/docs/print_guide.md
- github.com/liyiteng/AlohaMini/blob/main/AlohaMini1/README.md
- github.com/liyiteng/AlohaMini/blob/main/examples/pi0.5_openpi/README.md
- github.com/liyiteng/AM-ARM
- github.com/liyiteng/lerobot_alohamini
- github.com/liyiteng/lerobot_alohamini/blob/main/docs/alohamini/alohamini.md
- youtube.com/watch?v=_7KzKkqviVM