Connecting to sources…

Sawppy the Rover · Six-wheel motorized model of Curiosity and Perseverance (rocker-bogie suspension, six-wheel drive and four-wheel steering, 15 mm aluminium extrusions joined by 3D-printed connectors, ten serial bus servos). The body box uses 385 mm (lengthwise) and 245 mm (widthwise) beams and the wheels are 120 mm across; the creator says it is roughly the size of JPL's Open Source Rover with a payload bay sized for a 15-inch laptop, and gives no overall length, width, height or weight

Six-wheel motorized model of Curiosity and Perseverance (rocker-bogie suspension, six-wheel drive and four-wheel steering, 15 mm aluminium extrusions joined by…

Maker
Personal open-source project by Roger Cheng
Form
Six-wheel motorized model of Curiosity and Perseverance (rocker-bogie suspension, six-wheel drive and four-wheel steering, 15 mm aluminium extrusions joined by 3D-printed connectors, ten serial bus servos). The body box uses 385 mm (lengthwise) and 245 mm (widthwise) beams and the wheels are 120 mm across; the creator says it is roughly the size of JPL's Open Source Rover with a payload bay sized for a 15-inch laptop, and gives no overall length, width, height or weight
For
Individual hobbyists; the creator says builders are mostly adult hobbyists plus some college and high-school students (README)
Sensors
The base build has no camera or microphone: the ten LX‑16A serial bus servos report position (the community ROS Melodic stack derives odometry from it) and a volt meter shows battery voltage. The USB webcam and Google AIY Vision kit mast cameras in some photos are optional; the community ROS 2 Humble stack supports a Hokuyo laser rangefinder
Connectivity and app
A Raspberry Pi 3 runs software adapted from the SGVHAK rover and serves a web page over Wi‑Fi that turns a phone's touchscreen into a joystick; a dual-band router can extend range. Alternatives are a wired Arduino Nano joystick and an R/C receiver, plus community ROS Kinetic, ROS Melodic (with RViz and Gazebo simulation) and ROS 2 Humble stacks
Subscription
Open-source project, no subscription; the creator sells no assembled rover or kit
Openness
The repo is MIT-licensed (copyright 2018 Roger Cheng) and holds a snapshot of the STLs, the printing and assembly docs, and Arduino and ESP32 code; the creator says the design and build instructions are shared under MIT. The live CAD is a public Onshape document, not files in the repo. The default control software, SGVHAK_Rover, is a separate repo, also MIT; the community ROS stacks live in their own repos under their own licences
Privacy
The base build has no camera or microphone; the web control page is served by the rover's Raspberry Pi over local Wi‑Fi, and the docs mention no cloud service.
Not stated
Overall length, width, height and weight, assembly time, recommended age, exact battery life and top speed

Vendor claims

  • A motorized model of Curiosity and Perseverance for under $500 in parts
  • Faithfully reproduces the rocker-bogie suspension kinematics of the real rovers and is meant as a hardware platform for future autonomy software
  • All build information is free and public; the printed parts tolerate dimensional error and were verified on an inexpensive Monoprice Maker Select printer

Parts

  • Raspberry Pi 3 · Runs onboard rover control software
  • RT-AC1200 · Wireless router providing network connection
  • Extreme 32GB · Storage card for system image and data
  • 25D · Provides geared motion with encoder feedback
  • AX-12 · Drives configurable robot joints
  • LX-16A · Provides wheel position feedback over about 270 degrees
  • MP1584EN · Buck converter stepping battery to 5V
  • TB6-B · LiPo charger with cell balancing
  • ch341 · Converts USB data to serial signals
  • LX-224 · Connector plug for servo cables
  • 15mm 3-series · Forms the rover chassis and structural frame
  • HFS3 · Forms the rover's aluminum extrusion frame
Parts and sources

Sources