Sawppy the Rover teardown: parts and sources
The 12 parts inside Sawppy the Rover: Raspberry Pi 3, RT-AC1200, Extreme 32GB, 25D, AX-12, LX-16A. Maker and distributor stock for each, with the source documents.
Personal open-source project by Roger Cheng · Sawppy V1
| Part | Maker | Use | Source |
|---|---|---|---|
| Raspberry Pi 3 | Raspberry Pi | Runs onboard rover control software | |
| RT-AC1200 | ASUS | Wireless router providing network connection | |
| Extreme 32GB | SanDisk | Storage card for system image and data | |
| 25D | Provides geared motion with encoder feedback | ||
| AX-12 | Dynamixel | Drives configurable robot joints | |
| LX-16A | LewanSoul | Provides wheel position feedback over about 270 degrees | |
| MP1584EN | Qunqi | Buck converter stepping battery to 5V | |
| TB6-B | Tenergy | LiPo charger with cell balancing | |
| ch341 | Converts USB data to serial signals | ||
| LX-224 | JST | Connector plug for servo cables | |
| 15mm 3-series | Misumi | Forms the rover chassis and structural frame | |
| HFS3 | MISUMI | Forms the rover's aluminum extrusion frame |