Connecting to sources…

PlayBot (open dock that turns a Playdate handheld into a desktop robot) · Unofficial two-wheel desktop robot dock for Panic's Playdate handheld: the console slots in as the head and shows the face, an SG90 servo moves it through a push rod, two N20 gearmotors with encoders and two mini ball casters carry it, a Teensy 4.1 runs the hardware on a 1S LiPo, and the whole body is 3D printed (5 STLs). The dock also charges the console. Overall size and weight are not given

Unofficial two-wheel desktop robot dock for Panic's Playdate handheld: the console slots in as the head and shows the face, an SG90 servo moves it through a pu…

Maker
Guillaume Loquin (GitHub GuybrushTreep, YouTube channel Tiny Lab)
Form
Unofficial two-wheel desktop robot dock for Panic's Playdate handheld: the console slots in as the head and shows the face, an SG90 servo moves it through a push rod, two N20 gearmotors with encoders and two mini ball casters carry it, a Teensy 4.1 runs the hardware on a 1S LiPo, and the whole body is 3D printed (5 STLs). The dock also charges the console. Overall size and weight are not given
For
Makers who can solder and make their own cables, and who own a Playdate: the README warns it is not a plug-and-play project and needs a lot of soldering and custom connectors and wires
Sensors
In the dock: two TOF10120 time-of-flight distance sensors, a TEMT6000 ambient light sensor, two ITR20001 IR sensors, motor encoders and a MAX17048 fuel gauge; the console's own accelerometer and microphone are used too. No camera: the README says a DFRobot HuskyLens vision module will be compatible as an option
Connectivity and app
The Teensy 4.1 acts as a USB host and the Playdate sends it commands and reads sensors over USB serial; a sideloaded Lua app on the Playdate (pd-playbot-app, a state machine and behaviour system) is the brain, and the animation sequences sit on the Teensy's microSD card. The docs mention no network or cloud service
Subscription
Open-source project, no subscription
Openness
All three repos are MIT (copyright 2024 Guillaume Loquin): PlayBot holds the 5 STLs, Gerbers, BOMs and pick-and-place files for the two custom boards, the Teensy firmware and a sensor-test firmware, plus the parts list and illustrated assembly guide; pd-playbot-app is the Lua app on the Playdate; Playbot_Rig is a Blender rig and animation-sequence exporter. The README says the project is not affiliated with or endorsed by Panic
Privacy
No camera; the app uses the Playdate's microphone, data passes over USB between the console and the Teensy, and the docs mention no networking.
Not stated
Overall size and weight, assembly time, filament use, battery capacity (the BOM lists a “1S 15000mAh 504050” cell), recommended age

Vendor claims

  • Turns a Playdate handheld into a lovely little desktop robot that doubles as its charging dock
  • About 45 minutes of autonomous operation per charge
  • A fully 3D-printed body with parts at about $100–120 per bot (shipping excluded), and the BOM, board files and assembly guide all published
  • A Blender rig and exporter let you animate, render and export your own expression and motion sequences

Parts

  • Teensy 4.1 · Robot USB hub and serial controller
  • TOF10120 · Provides front and rear ToF distance sensing
  • ITR20001 · Provides sensor signals to the main board
  • TEMT6000 · Measures ambient light intensity
  • DRV8835 · Drives two motors and receives encoder feedback
  • N20 · Drives the robot through the motor driver
  • SG90 · Moves the screen mechanism using a pull rod
  • MAX17048 · Monitors battery charge for fuel gauging
  • MAX1704X · Monitors battery charge level
  • MCP73831 · Charges the single-cell LiPo battery
  • TPS61023 · Boosts battery voltage to 5V
  • WS2812 · Provides programmable LED status indication
Parts and sources

Sources