LeRobot Humanoid biped platform (Hugging Face's open low-cost humanoid) · Open-source biped platform built mostly from 3D-printed parts, currently legs and pelvis only: 12 DoF (hip z, hip x, hip y, knee, ankle x and ankle y per leg), 12 RobStride joint motors, a linkage-driven knee and an ankle driven by two shin motors through ball-joint rod-end linkages, with a Raspberry Pi 5 on the torso (pelvis). The official pages give no height or weight: the creators' no-arms model (URDF/MJCF) sums to 12.7 kg across its links, and the training config starts the standing pose with the torso frame 0.75 m above the ground
Open-source biped platform built mostly from 3D-printed parts, currently legs and pelvis only: 12 DoF (hip z, hip x, hip y, knee, ankle x and ankle y per leg),…
- Maker
- Hugging Face's LeRobot team (first developed by Virgile Batto)
- Form
- Open-source biped platform built mostly from 3D-printed parts, currently legs and pelvis only: 12 DoF (hip z, hip x, hip y, knee, ankle x and ankle y per leg), 12 RobStride joint motors, a linkage-driven knee and an ankle driven by two shin motors through ball-joint rod-end linkages, with a Raspberry Pi 5 on the torso (pelvis). The official pages give no height or weight: the creators' no-arms model (URDF/MJCF) sums to 12.7 kg across its links, and the training config starts the standing pose with the torso frame 0.75 m above the ground
- For
- Researchers and builders who are comfortable with robot hardware: the release post addresses people who want a humanoid they can build, modify, break, repair, simulate, train and control, and expects familiarity with motor setup, wiring, calibration and safety procedures; the Bilibili intro also names hobbyists on a budget and students who want to learn the sim-to-real workflow
- Sensors
- The BOM has one IMU (BNO055 or BNO085; the runtime also supports a JY901) plus joint state reported over CAN by the 12 RobStride motors; there is no camera, microphone or foot force sensor
- Connectivity and app
- The on-board Raspberry Pi 5 (Ubuntu, Python 3.13, uv) runs the control stack and drives the motors through a SAVVYCANFD two-channel USB CAN-FD adapter (can0, can1); commands come from a gamepad or a policy, MeshCat handles visualisation, and a LeRobot robot interface collects data. The docs describe no network setup or cloud service
- Subscription
- Open-source project with no subscription; no assembled robot or kit is sold
- Openness
- The hardware repo, lerobot-humanoid-hardware, is Apache-2.0 (copyright 2026 The Hugging Face team) and holds 75 STL exports, the BOM, assembly and wiring docs and a motor setup script; the source CAD is a public Onshape document with no licence of its own stated. The runtime, model, design and identification repos are also Apache-2.0; the umbrella repo huggingface/lerobot-humanoid holds only a README and no licence file, and the training environments in Virgileboat/lerobot-legged-zoo carry no declared licence
- Privacy
- The BOM has no camera or microphone; the control stack runs locally on the robot's Raspberry Pi 5, and the docs mention no cloud service.
- Not stated
- Height and overall weight (only model data), battery and run time, walking speed, build time, recommended age
Vendor claims
- A low-cost humanoid platform others can reproduce, mostly 3D-printed, for around $2,500 in parts
- A full-stack release: hardware files, assembly docs, design tools, runtime, identification tools and training environments together
- Connects the loop from mechanical design to simulation, data collection, identification, training and real-robot deployment; the Bilibili intro says it suits students who want to learn the sim-to-real workflow
- A broken part is simply reprinted, and a design choice that does not work can be changed and tested again
Parts
- Raspberry Pi 5 · Main computer for robot control and integration
- BNO055 · Measures orientation for robot balance control
- BNO085 · Measures orientation for robot balance control
- jy901 · Provides inertial measurements for robot orientation estimation
- O0 · Drives torso joint motion
- O2 · Drives hip joint motion
- O3 · Drives thigh joint motion
- O5 · Drives shin joint motion
- RobStride O0 · Rotates the torso between its upper and lower sections.
- RobStride O2 · Rotates the left and right hip joints.
- RobStride O3 · Articulates the thigh and knee mechanisms.
- RobStride O5 · Drives shin joint actuators
- SAVVYCANFD 2CH · Converts USB to dual CAN-FD bus
- SAVVYCANFD 2CH CANFD · Connects motor CAN FD network through USB
- XH-2A · Connects inter-cable robot wiring
- XH-2Y · Connects inter-cable robot wiring
- XT30 · Connects the robot main power input
- 625-zz · Supports foot joints and reduces rotational friction
Sources
- huggingface.co/blog/VirgileBatto/lerobot-humanoid
- github.com/huggingface/lerobot-humanoid
- github.com/huggingface/lerobot-humanoid-hardware
- github.com/huggingface/lerobot-humanoid-hardware/blob/main/LICENSE
- github.com/huggingface/lerobot-humanoid-hardware/blob/main/docs/safety.md
- github.com/huggingface/lerobot-humanoid-hardware/blob/main/docs/electronics/first_power_on.md
- github.com/huggingface/lerobot-humanoid-hardware/blob/main/docs/manufacturing/printing_guide.md
- github.com/huggingface/lerobot-humanoid-hardware/blob/main/docs/assembly/assembly_guide.md
- github.com/huggingface/lerobot-humanoid-hardware/blob/main/hardware/bom/bom_buy.md
- github.com/huggingface/lerobot-humanoid-hardware/blob/main/hardware/electronics/connectors.md
- github.com/huggingface/lerobot-humanoid-runtime
- github.com/huggingface/lerobot-humanoid-model
- github.com/huggingface/lerobot-humanoid-design
- github.com/huggingface/lerobot-humanoid-identification
- github.com/Virgileboat/lerobot-legged-zoo
- github.com/Virgileboat/lerobot-legged-zoo/blob/main/training_exemples/lerobot_humanoid_no_arms/lerobot_humanoid_no_arms_constants.py
- bilibili.com/video/BV18rGt6wECa