LeRobot Humanoid biped platform (Hugging Face's open low-cost humanoid) teardown: parts and sources
The 18 parts inside LeRobot Humanoid biped platform (Hugging Face's open low-cost humanoid): Raspberry Pi 5, BNO055, BNO085, jy901, O0, O2. Maker and distributor stock f…
Hugging Face's LeRobot team (first developed by Virgile Batto)
| Part | Maker | Use | Source |
|---|---|---|---|
| Raspberry Pi 5 | Raspberry Pi | Main computer for robot control and integration | |
| BNO055 | Measures orientation for robot balance control | ||
| BNO085 | Measures orientation for robot balance control | ||
| jy901 | Provides inertial measurements for robot orientation estimation | ||
| O0 | RobStride | Drives torso joint motion | |
| O2 | RobStride | Drives hip joint motion | |
| O3 | RobStride | Drives thigh joint motion | |
| O5 | RobStride | Drives shin joint motion | |
| RobStride O0 | RobStride | Rotates the torso between its upper and lower sections. | |
| RobStride O2 | RobStride | Rotates the left and right hip joints. | |
| RobStride O3 | RobStride | Articulates the thigh and knee mechanisms. | |
| RobStride O5 | RobStride | Drives shin joint actuators | |
| SAVVYCANFD 2CH | SAVVYCANFD | Converts USB to dual CAN-FD bus | |
| SAVVYCANFD 2CH CANFD | SAVVYCANFD | Connects motor CAN FD network through USB | |
| XH-2A | Connects inter-cable robot wiring | ||
| XH-2Y | Connects inter-cable robot wiring | ||
| XT30 | Connects the robot main power input | ||
| 625-zz | Supports foot joints and reduces rotational friction |