Tiny Engineer (a desk robot that gives an AI coding agent a body) · A small 3D-printed robot seated at a desk with a laptop, mug, lamp and service bell: five micro servos move the head (pitch), neck (yaw), body and both hands, a 0.91-inch OLED shows the eyes, and a speaker plays cues and speech
A small 3D-printed robot seated at a desk with a laptop, mug, lamp and service bell: five micro servos move the head (pitch), neck (yaw), body and both hands, …
- Maker
- Krzysztof Jamroz (jamro) open-source project
- Form
- A small 3D-printed robot seated at a desk with a laptop, mug, lamp and service bell: five micro servos move the head (pitch), neck (yaw), body and both hands, a 0.91-inch OLED shows the eyes, and a speaker plays cues and speech
- For
- Software engineers who use AI coding agents; the README rates it Medium, “a fair first hardware project for a software engineer, not a one-LED kit”, and ships a nine-chapter primer, From Code to Circuits
- Sensors
- The parts list has no camera, microphone or other sensor, only outputs: five analog micro servos (driven through a PCA9685), a Waveshare 0.91-inch 128×32 OLED (SSD1306, I²C), an 8 Ω 1 W speaker (MAX98357A I²S amplifier) and the ESP32‑C3‑Zero's on-board RGB LED; plus BOOT and RESET buttons
- Connectivity and app
- The ESP32‑C3 joins 2.4 GHz Wi‑Fi and serves an HTTP REST API on the local network (tiny-engineer.local, with a web control panel), or works over USB serial only; the npx tiny-engineer CLI turns Cursor, Claude Code and Antigravity hook events into animations, and Codex, Windsurf or any script that can POST can call /anim and /play (which streams WAV speech) directly; firmware flashes from Chrome or Edge in the browser and updates over the air
- Subscription
- Self-built open source; the robot itself has no subscription
- Openness
- The GitHub API reports NOASSERTION because the repo has two licences (LICENSING.md): firmware, CLI and integrations, scripts and docs are MIT; the Fusion source CAD (.f3d), 3MF/STL/STEP printables, mod CAD and the KiCad main board are CERN‑OHL‑S‑2.0 (strongly reciprocal: commercial use allowed, but modified products that are distributed must publish their complete source under the same licence), copyright Krzysztof Jamroz. The Tiny Engineer name, logo, AI emblem geometry and branded project images in docs/ are not licensed at all (TRADEMARK.md)
- Privacy
- No camera or microphone. The robot only receives animation names and audio from IDE hooks or scripts, over local-network HTTP or USB serial, and the docs mention no cloud service; the HTTP API has no authentication by default, and a Bearer token can be set in its settings.
- Not stated
- Total parts cost, overall size and weight, assembly time, recommended age
Vendor claims
- Gives your AI coding agent a body: it looks around while the agent reads files, types while it writes code, looks up while it thinks or waits, and rings a bell when the task is done
- Open source: print the body, plug the ESP32, servos, OLED and speaker into the main control board, flash it, and it joins your Wi‑Fi
- Medium difficulty: a fair first hardware project for a software engineer
Parts
- ESP32 · Provides control, Wi-Fi, and USB serial connectivity
- ESP32-C3 · Runs firmware and controls servos, face, and bell
- ESP32-C3-Zero · Main controller for robot logic and wireless connectivity.
- ESP32-C3FH4 · Wireless MCU with integrated 4 MB flash
- C3-Zero · Ceramic antenna supports wireless signal connectivity
- MAX98357A · Amplifies audio to drive the speaker.
- SSD1306 · Displays robot status and information.
- ES9051 · Compact servo that drives robot joints.
- FS0307 · Compact servo that drives robot joints.
- HD-1370A · Legacy servo for backward-compatible robot builds.
- PCA9685 · Generates PWM signals for five servos.
- SG90 · Five servos drive the robot body and face movements
- ME6217C33M5G · Provides regulated 3.3 V for logic loads
- WS2812 · RGB status indicator on GPIO10
Sources
- github.com/jamro/tiny-engineer
- github.com/jamro/tiny-engineer/blob/main/LICENSING.md
- github.com/jamro/tiny-engineer/blob/main/TRADEMARK.md
- github.com/jamro/tiny-engineer/blob/main/docs/shopping.md
- github.com/jamro/tiny-engineer/blob/main/docs/getting-started.md
- github.com/jamro/tiny-engineer/blob/main/docs/hardware/components.md
- github.com/jamro/tiny-engineer/blob/main/docs/hardware/order-main-control-board.md
- github.com/jamro/tiny-engineer/blob/main/docs/3d/order-parts.md
- github.com/jamro/tiny-engineer/blob/main/3d_models/README.md
- github.com/jamro/tiny-engineer/blob/main/docs/integration.md
- github.com/jamro/tiny-engineer/blob/main/docs/api.md
- github.com/jamro/tiny-engineer/releases
- github.com/jamro/tiny-engineer/discussions/50
- github.com/jamro
- tinyengineer.dev/