K2 (open-source 3D-printed 12-DoF biped) · A small 3D-printed biped with no upper body: 12 Feetech STS3215 servos (per leg: hip pitch, roll and yaw, knee, ankle pitch and roll), 0.426 m tall and 1.40 kg, with a reinforcement-learned gait running on a XIAO ESP32-S3 microcontroller
A small 3D-printed biped with no upper body: 12 Feetech STS3215 servos (per leg: hip pitch, roll and yaw, knee, ankle pitch and roll), 0.426 m tall and 1.40 kg…
- Maker
- Kapalik Khanal open-source project
- Form
- A small 3D-printed biped with no upper body: 12 Feetech STS3215 servos (per leg: hip pitch, roll and yaw, knee, ankle pitch and roll), 0.426 m tall and 1.40 kg, with a reinforcement-learned gait running on a XIAO ESP32-S3 microcontroller
- For
- Researchers and reinforcement-learning hobbyists; the README calls K2 a research platform, and the project site says it is not yet a complete kit (no assembly guide, print settings, wiring diagram or editable CAD)
- Sensors
- An LSM6DS3 IMU over I²C plus joint position and velocity from the 12 servos; the README says sensing is proprioceptive only and nothing on board handles perception or planning. Seeed's docs say the XIAO ESP32-S3 Sense board carries an OV5640 camera and a digital microphone, but the K2 docs do not use them
- Connectivity and app
- The ESP32-S3 runs its own Wi‑Fi access point, K2-Robot, controlled from a phone browser at 192.168.4.1 or from an Xbox controller over BLE; on a Raspberry Pi 5, keyboard.py or joystick.py runs the same policy. No app and no cloud service
- Subscription
- Open-source project, no subscription
- Openness
- The GitHub API reports MIT (“Copyright (c) 2026 K2 contributors”), covering the ESP32-S3 firmware, the Raspberry Pi runtime, the mjlab training code, the shipped ONNX policy, the MJCF/URDF digital twin and STLs for 18 structural parts; the README says dependencies keep their own licences. The project site says the repo has meshes only, with no editable CAD (.f3d/.step)
- Privacy
- The docs use no camera or microphone, and control is entirely local. The project site warns that the ESP32 web control's access point uses a documented default password and its local control endpoints are unauthenticated: use it on a trusted network, change the password for public demos, and never expose it to the internet.
- Not stated
- Battery type, capacity and runtime, assembly time, print settings and filament, editable CAD, the creator's location, kit price
Vendor claims
- The learned gait runs entirely on a microcontroller: a 55,088-parameter policy trained with PPO in MuJoCo runs at 50 Hz on a Seeed XIAO ESP32-S3, with no Linux computer or GPU on board
- One policy covers hold, march, forward/backward walking, turning and lateral stepping, and the same policy also runs on a Raspberry Pi 5
- A $320.52 bill of materials; the digital twin can be driven from the keyboard in MuJoCo with no robot or GPU
Parts
- ESP32-S3R8 · Runs K2 control, sensing, and wireless communications
- Raspberry Pi 5 · Runs the policy and controls robot servos
- XIAO ESP32-S3 · Serves as K2 controller and connects sensors
- XIAO ESP32-S3 Sense · Runs inference and handles IMU, servo telemetry, and joint commands
- OV2640 · Captures 1600×1200 fixed-focus images
- OV3660 · Captures 2048×1536 fixed-focus images
- OV5640 · Captures 2592×1944 autofocus images
- LSM6DS3 · Measures robot body orientation and acceleration
- ST3215 · Drives the robot's twelve joints
- STS3215 · Drives 12 joints and reports position and velocity
- CH343 · Bridges controller to servo serial bus
- U.FL-R-SMT1 · Connects the onboard U.FL antenna
Sources
- github.com/kapalikkhanal/K2
- github.com/kapalikkhanal/K2/blob/main/robot.md
- github.com/kapalikkhanal/K2/blob/main/esp32-s3/README.md
- github.com/kapalikkhanal/K2/blob/main/hardware/requirements-pi.txt
- github.com/kapalikkhanal/K2/blob/main/LICENSE
- kapalikkhanal.github.io/K2/
- wiki.seeedstudio.com/xiao_esp32s3_getting_started/