K2 (open-source 3D-printed 12-DoF biped) teardown: parts and sources
The 12 parts inside K2 (open-source 3D-printed 12-DoF biped): ESP32-S3R8, Raspberry Pi 5, XIAO ESP32-S3, XIAO ESP32-S3 Sense, OV2640, OV3660. Maker and distributor stock…
Kapalik Khanal open-source project · K2
| Part | Maker | Use | Source |
|---|---|---|---|
| ESP32-S3R8 | Espressif | Runs K2 control, sensing, and wireless communications | LCSC C2913194 |
| Raspberry Pi 5 | Raspberry Pi | Runs the policy and controls robot servos | |
| XIAO ESP32-S3 | Seeed Studio | Serves as K2 controller and connects sensors | |
| XIAO ESP32-S3 Sense | Seeed | Runs inference and handles IMU, servo telemetry, and joint commands | |
| OV2640 | Captures 1600×1200 fixed-focus images | ||
| OV3660 | Captures 2048×1536 fixed-focus images | ||
| OV5640 | Captures 2592×1944 autofocus images | ||
| LSM6DS3 | Measures robot body orientation and acceleration | ||
| ST3215 | DFRobot | Drives the robot's twelve joints | |
| STS3215 | Feetech | Drives 12 joints and reports position and velocity | |
| CH343 | Waveshare | Bridges controller to servo serial bus | |
| U.FL-R-SMT1 | Connects the onboard U.FL antenna |