Roomi open-source cleaning and housekeeping robot · Cart-style mobile manipulator: a storage cart on two driven wheels (two geared NEMA 23 steppers) and casters, carrying one long arm (5 DoF per the README, 0.95 m reach per the demo video's caption) whose joints are closed-loop steppers with AS5600 encoders, with two OLED eyes on the head; the creators give no footprint, height, weight or payload
Cart-style mobile manipulator: a storage cart on two driven wheels (two geared NEMA 23 steppers) and casters, carrying one long arm (5 DoF per the README, 0.95…
- Maker
- Open-source projects by Jade Choghari and Kyum Lee
- Form
- Cart-style mobile manipulator: a storage cart on two driven wheels (two geared NEMA 23 steppers) and casters, carrying one long arm (5 DoF per the README, 0.95 m reach per the demo video's caption) whose joints are closed-loop steppers with AS5600 encoders, with two OLED eyes on the head; the creators give no footprint, height, weight or payload
- For
- The README pitches it for hotels and homes (“Autonomous AI Robot for Hotels and Homes”) and calls it the creators' side project; building one takes basic Git, pip and terminal skills plus PlatformIO and MuJoCo
- Sensors
- The BOM has no camera or microphone: the sensors are six AS5600 magnetic encoders (read through three TCA9548A I²C multiplexers) and six limit switches for closed-loop joints and homing; the repo has no perception or autonomous-navigation code either
- Connectivity and app
- No app: a laptop reads the angles of four Feetech servos (IDs 1–4) on a modified SO100 leader arm, takes the arrow keys for the wheels and the space bar for the gripper, and sends them at 100 Hz over UDP (port 5005) to a Raspberry Pi on the robot; the Pi forwards joint targets at 50 Hz over USB serial to two arm RP2040 boards, wheel commands to a third RP2040, and drives the gripper servo. The Pi's IP address is hard-coded in teleop.py
- Subscription
- Self-built open source, no subscription
- Openness
- Apache‑2.0 at repo level (the LICENSE opens with “Copyright 2025 Roomi. All rights reserved.”): a whole-robot STEP (hardware/CAD/Roomi.zip, about 32 MB unpacked), the MuJoCo model Roomi.xml with per-link STL meshes, RP2040 firmware for the arm and wheels, the Raspberry Pi listener, the laptop teleoperation script, and MuJoCo and ManiSkill simulation scripts; the BOM is a Google Sheet with no licence of its own. The README's “3D print”, “assemble” and “run the software” steps link to no files or guide, and the docs are marked “soon”
- Privacy
- The BOM has no camera or microphone and the code connects to no cloud service; teleoperation commands travel over the LAN as unencrypted, unauthenticated UDP.
- Not stated
- Footprint, height, weight, payload, battery and runtime (the BOM lists only a power supply), the Raspberry Pi model, how the leader arm is modified, assembly and print instructions, the creators' location, recommended age
Vendor claims
- Low cost: the creators put the BOM under $700 (demo video and banner), and the README says under about $900 and about 5 hours to assemble
- An autonomous cleaning and housekeeping robot for hotels and homes: clean, make beds, organise
- A high-torque, long-reach 5-DoF arm, teleoperated from a modified SO100 leader arm
- Simulated and trained in MuJoCo and ManiSkill (the README also announces Genesis support)
Parts
- RP2040 · Runs PID control for each robot joint
- ssd1306 · Drives the dual OLED eye displays
- AS5600 · Measures joint angle for position feedback
- TMC2209 · Drives the two stepper motor axes
- TCA9548A · Multiplexes I²C access to both encoders
Sources
- github.com/jadechoghari/roomi
- github.com/jadechoghari/roomi/blob/main/README.md
- github.com/jadechoghari/roomi/blob/main/LICENSE
- docs.google.com/spreadsheets/d/e/2PACX-1vSSJx5n8vQ6axefWLVfU5Om-5jMr0KQSXPaziQnbyMNoEo5ZU6qLCnzRi-AQa0Jc8n8X-8icOWrnf3P/pubhtml
- github.com/jadechoghari/roomi/blob/main/hardware/RP2040_firmware/Arm_firmware.cpp
- github.com/jadechoghari/roomi/blob/main/hardware/RP2040_firmware/Wheel_firmware.cpp
- github.com/jadechoghari/roomi/blob/main/hardware/rpi_listener.py
- github.com/jadechoghari/roomi/blob/main/hardware/teleop.py
- github.com/jadechoghari/roomi/blob/main/roomi.py
- github.com/jadechoghari/roomi/blob/main/assets/Roomi.xml
- v0-robotics-landing-page.vercel.app/
- youtube.com/watch?v=dswMPrqsM8E
- youtube.com/@jadechoghari3433/videos