Coglet (desktop companion robot) · 3D-printed DIY desktop companion robot: nine servos move the ears, eyelid, mouth, eyes and neck, with camera face tracking and LLM voice chat
3D-printed DIY desktop companion robot: nine servos move the ears, eyelid, mouth, eyes and neck, with camera face tracking and LLM voice chat · Will Cogley · N…
- Maker
- Will Cogley · NMRobotics (NM Robotics)
- Form
- 3D-printed DIY desktop companion robot: nine servos move the ears, eyelid, mouth, eyes and neck, with camera face tracking and LLM voice chat
- For
- Experienced makers and engineers (the store says 3D printing and DIY skills are needed)
- Sensors
- Two cameras: a GC0308 on the ESP32‑S3's DVP interface for vision (a custom part with reversed pinout), and a Grove Vision AI V2 with an OV5647 HD camera doing face tracking locally on the module; an I2S microphone (the store kit ships an SPH0645LM4H mic board) and a 4 Ω 3 W speaker; optional camera-compatible realistic eyeballs
- Connectivity and app
- ESP32‑S3 Wi‑Fi/BLE; the default firmware is built on XiaoZhi AI (xiaozhi-esp32) and configured through the xiaozhi.me dashboard; the cloud LLM sends back an expression word, which the ESP32 passes over UART to the RP2040 that drives the servos; wake word “Hello Coglet”. NMRobotics says a locally run alternative dashboard is in development
- Subscription
- Neither the store nor the knowledge base mentions a subscription; the cost of the XiaoZhi AI cloud service was not read
- Openness
- The repo's LICENSE (GitHub reports NOASSERTION) states that, unless noted otherwise, the hardware designs, 3D models and original code are CC BY‑NC 4.0 (Attribution‑NonCommercial): free for personal, hobby and educational use, with any commercial use requiring prior written consent; some files in CogletESP derive from XiaoZhi AI (xiaozhi-esp32) and those are MIT (CogletESP/LICENSE names Shenzhen Xinzhi Future Technology and project contributors). The repo holds the EasyEDA Pro PCB project and schematic PDF, 3MF/STL print files, the ESP32 firmware and the RP2040 MicroPython animation code. The official knowledge base calls it a “shared-source” project
- Privacy
- Two cameras and a microphone are on board. Face tracking runs locally on the Grove Vision AI module; voice chat goes through the XiaoZhi AI cloud (default OTA address api.tenclass.net, dashboard xiaozhi.me), and the knowledge base says the board handles “cloud communication”; how cloud data is stored was not found.
- Price
- GBP 143.57 (2026-11-22)
- Not stated
- Overall size and weight, recommended age, build time, self-sourced BOM total, cost and data retention of the XiaoZhi AI cloud service
Vendor claims
- Will Cogley's DIY desktop companion for makers
- Nine servos move the ears, eyelid, mouth and eyes, tracking and following your face in real time
- 3D print files, code and PCB layouts are free to download and modify (CC BY‑NC 4.0)
Parts
- ESP32-S3 · Main AI, vision, audio, and wireless processor
- RP2040 · Main processor for robot control
- MAX98357A · Amplifies I2S audio to drive the speaker
- SPH0645LM4H-1-8 · Captures microphone audio input
- GC0308 · Captures images for robot vision
- OV5647 · Captures images for real-time face tracking
- MG90s · Drives nine robot joints
- PCA9685 · Drives up to 16 servo PWM channels over I2C
- ts90md · Acts as a servo to drive robot joint motion
- CH343P · Converts the USB bus to a UART serial interface
Sources
- github.com/will-cogley/Coglet
- github.com/will-cogley/Coglet/blob/main/LICENSE
- github.com/will-cogley/Coglet/blob/main/CogNogDatasheet.md
- github.com/will-cogley/Coglet/blob/main/CogletESP/LICENSE
- github.com/will-cogley/Coglet/blob/main/CogletESP/sdkconfig
- nmrobots.com/pages/coglet
- nmrobots.com/products/coglet-2
- nmrobots.com/collections/coglet
- nmrobots.com/policies/contact-information
- youtube.com/watch?v=k_1Paexlc_A
- youtube.com/watch?v=EdgYNhH70Qo
- bilibili.com/video/BV1TLXvByE13