Connecting to sources…

AgiBot X1 full-stack open-source humanoid · A modular humanoid 130 cm tall and 33 kg: the Chinese product page gives 31 active DoF and the English page 34; the development guide lists 29 joints (R86-2 ×9, R86-3 ×6, R52 ×10, L28 linear actuators ×4) plus 2 grippers, with 3 optional DoF in the head; 48V PowerFlow joints, 2 h of runtime, up to 1 m/s walking and 0.5 kg per arm (product page)

A modular humanoid 130 cm tall and 33 kg: the Chinese product page gives 31 active DoF and the English page 34; the development guide lists 29 joints (R86-2 ×9…

Maker
AgiBot Innovation (Shanghai) Technology Co., Ltd. (AgiBot robots)
Form
A modular humanoid 130 cm tall and 33 kg: the Chinese product page gives 31 active DoF and the English page 34; the development guide lists 29 joints (R86-2 ×9, R86-3 ×6, R52 ×10, L28 linear actuators ×4) plus 2 grippers, with 3 optional DoF in the head; 48V PowerFlow joints, 2 h of runtime, up to 1 m/s walking and 0.5 kg per arm (product page)
For
The official pages name no target users: the development guide is written for developers building the robot themselves, and the inference README calls its code “research code” that changes often
Sensors
The full BOM lists one D435 camera (with a camera mount) and two YIS320 attitude sensors; the development guide says the software currently uses only the IMU on the lower-body DCU (serial, 921600 baud). A phone sits in the head (BOM: “phone ×1” plus a phone holder), and the docs do not say what it does; the BOM lists no microphone or speaker
Connectivity and app
No app: an industrial PC (MiniPC in the BOM) runs the inference and driver software on the AimRT middleware, and a Logitech F710 gamepad switches between standing and walking (README); two DCU domain controllers bridge EtherCAT to 3 FDCAN buses for the joints at 1 kHz and support OTA (product page); actuators are set up with the REF-CLI Windows tool over USB‑C; the robot powers on with a rocker main switch and a wireless key switch (development guide)
Subscription
No page mentions a subscription; the inference and training code is open source
Openness
The software is open and the hardware carries no licence: agibot_x1_infer (inference, DCU driver, gamepad and simulation) is under the Mulan Permissive Software License MulanPSL‑2.0, as is the AimRT middleware it builds on; agibot_x1_train has no LICENSE file, but its setup.py and source SPDX headers declare BSD‑3‑Clause (with copyright lines for NVIDIA, ETH Zurich, Beijing RobotEra and AgiBot). agibot_x1_hardware publishes the BOM, whole-robot STEP, SolidWorks 2022 source drawings, PDF drawings, the assembly SOP and a toolkit list (in three batches: 2024‑10‑24, 2025‑01‑08 and 2025‑03‑07), but has no README and no licence, and an issue from 2024‑12 asking for one is still open; the development guide also offers Baidu Netdisk and Google Drive downloads
Privacy
There is a D435 camera on the robot and a phone in the head; the software runs locally on the on-board PC, and the official pages do not say where camera or phone data goes.
Not stated
Price and BOM total (the store domain does not resolve and the BOM has no prices), battery capacity and voltage, microphone, what the phone in the head does, hardware licence, assembly time, recommended age, data handling

Vendor claims

  • A full-stack open-source robot: modular, high-DoF, safe and lightweight, highly extensible (product page)
  • The development guide is enough to build the robot
  • The training code works with the inference software for walking on the real robot and in simulation, and can be used to train other robot models

Parts

  • YIS320 · Provides inertial measurements for robot positioning
  • L28 · Drives linear robot axes with integrated FDCAN communication
  • R52 · Drives compact robot joints with integrated FOC control
  • R86-2 · Drives high-speed robot joints with integrated FOC control
  • R86-3 · Drives high-torque robot joints with integrated FOC control
  • F710 · Controls robot movement, turning, and state changes
Parts and sources

Sources