JPL Open Source Rover (OSR) · Build-it-yourself six-wheel rover scaled down from JPL's Mars rovers (rocker-bogie suspension, aluminium frame, Raspberry Pi brain)
Build-it-yourself six-wheel rover scaled down from JPL's Mars rovers (rocker-bogie suspension, aluminium frame, Raspberry Pi brain) · NASA Jet Propulsion Labor…
- Maker
- NASA Jet Propulsion Laboratory (JPL) open-source project
- Form
- Build-it-yourself six-wheel rover scaled down from JPL's Mars rovers (rocker-bogie suspension, aluminium frame, Raspberry Pi brain)
- For
- Learners getting into mechanical engineering, electronics, software and robotics, with no prior skills required; also a research platform for rugged terrain (README)
- Sensors
- The base build has no camera or microphone: the six drive motors carry encoders, an INA260 measures battery voltage and current, and four servos steer. An optional mast adds a two-servo pan-tilt head for a camera, light or environmental sensors, but integrating those sensors is outside the docs
- Connectivity and app
- A Raspberry Pi 3, 4 or 5 runs Ubuntu and ROS 2 and accepts Bluetooth, Wi‑Fi or USB devices; a USB gamepad is recommended for driving (an Xbox controller with its dongle, or a Spektrum WS2000 with a DXs transmitter). Only the Pi 5 has two full serial interfaces, so only it can talk to the RoboClaw motor controllers and run Bluetooth at once
- Subscription
- Open-source project, no subscription; no assembled rover or official kit is sold
- Openness
- The main repo carries a single Apache‑2.0 licence (copyright 2018 California Institute of Technology) covering the parts list, the KiCad control-board sources (v2.0.3), Gerbers and BOMs, laser-cut body-plate DXF/SVG files, the mast STLs and the build docs; the mechanical CAD is a public OnShape model, not files in the repo. The osr-rover-code ROS 2 software is also Apache‑2.0. The OSHWA open-hardware certification US002551 (2023‑10‑15) records the licences as hardware “Other”, software Apache, documentation “Other”
- Privacy
- The base build has no camera or microphone; ROS 2 runs locally on the rover's Raspberry Pi and the docs mention no cloud service.
- Not stated
- Size and weight, recommended age, an exact total including the extra parts, maximum obstacle height
Vendor claims
- A scaled-down version of JPL's six-wheel Mars rover design, built entirely from off-the-shelf parts with no metal machining
- A teaching and learning project in mechanical engineering, electronics, software and robotics, with no prior skills required
- Rocker-bogie suspension, a differential pivot and six-wheel Ackermann steering keep all six wheels on the ground over obstacles
Parts
- Raspberry Pi 3 · Runs the operating system and manages rover control
- Raspberry Pi 5 · Runs autonomous navigation and rover control software
- RPi 3 · Runs onboard software and controls the rover
- WS2000 · Receives radio control signals from the transmitter
- 754-2186-ND · Displays rover operating status
- X4 · Scans surroundings for mapping and localization
- BNO055 · Provides orientation and inertial measurements
- BNO085 · Improves odometry with orientation sensing
- PCA9685 · Drives the steering servos through PWM channels
- RoboClaw 2x15 · Drives motors and controls rover motion
- RoboClaw 2x7 · Drives motors and controls rover motion
- USB Roboclaw 2x7a · Drives rover motors through the serial bus
- 1655-1N4148CT-ND · Rectifies and clamps signals in the rover electronics
- 2N3906TAFSCT-ND · Switches and amplifies control signals
- 497-2738-5-ND · Provides Schottky rectification and reverse-polarity protection
- 576-2235-ND · Regulates the rover's 3.3-volt supply
- 732-11376-ND · Holds and protects the rover's main fuse
- D24V150F5 · Provides stepped-down power to the rover
- F3631-ND · Protects the power rail by blowing on overload
- INA260 · Measures voltage, current, and power in the rover
Sources
- github.com/nasa-jpl/open-source-rover
- github.com/nasa-jpl/open-source-rover/blob/master/LICENSE.txt
- github.com/nasa-jpl/open-source-rover/blob/master/parts_list/README.md
- github.com/nasa-jpl/open-source-rover/blob/master/parts_list/extra_parts.md
- github.com/nasa-jpl/open-source-rover/blob/master/electrical/pcb/README.md
- github.com/nasa-jpl/open-source-rover/blob/master/mechanical/README.md
- github.com/nasa-jpl/open-source-rover/blob/master/expansion/mast/README.md
- github.com/nasa-jpl/open-source-rover/blob/master/examples/README.md
- github.com/nasa-jpl/open-source-rover/releases
- github.com/nasa-jpl/osr-rover-code
- github.com/nasa-jpl/osr-rover-code/blob/master/setup/rpi.md
- github.com/nasa-jpl/osr-rover-code/releases
- open-source-rover.readthedocs.io/en/latest/
- jplopensourcerover.com/
- certification.oshwa.org/us002551.html