JPL Open Source Rover (OSR) teardown: parts and sources
The 37 parts inside JPL Open Source Rover (OSR): Raspberry Pi 3, Raspberry Pi 5, RPi 3, WS2000, 754-2186-ND, X4. Maker and distributor stock for each, with the source do…
NASA Jet Propulsion Laboratory (JPL) open-source project
| Part | Maker | Use | Source |
|---|---|---|---|
| Raspberry Pi 3 | Raspberry Pi | Runs the operating system and manages rover control | |
| Raspberry Pi 5 | Raspberry Pi | Runs autonomous navigation and rover control software | |
| RPi 3 | Runs onboard software and controls the rover | ||
| WS2000 | Spektrum | Receives radio control signals from the transmitter | |
| 754-2186-ND | Displays rover operating status | ||
| X4 | YDLidar | Scans surroundings for mapping and localization | |
| BNO055 | Adafruit | Provides orientation and inertial measurements | |
| BNO085 | Improves odometry with orientation sensing | ||
| PCA9685 | Drives the steering servos through PWM channels | ||
| RoboClaw 2x15 | Drives motors and controls rover motion | ||
| RoboClaw 2x7 | Drives motors and controls rover motion | ||
| USB Roboclaw 2x7a | Roboclaw | Drives rover motors through the serial bus | |
| 1655-1N4148CT-ND | Rectifies and clamps signals in the rover electronics | ||
| 2N3906TAFSCT-ND | Switches and amplifies control signals | ||
| 497-2738-5-ND | Provides Schottky rectification and reverse-polarity protection | ||
| 576-2235-ND | Regulates the rover's 3.3-volt supply | ||
| 732-11376-ND | Holds and protects the rover's main fuse | ||
| D24V150F5 | Polulu | Provides stepped-down power to the rover | |
| F3631-ND | Protects the power rail by blowing on overload | ||
| INA260 | Measures voltage, current, and power in the rover | ||
| XF0374 | ANGEEK | Replaces the original step-down converter | |
| 1726750613-ND | Provides a 6-position high-current board connection | ||
| 455-1708-ND | Provides a 6-position compact board connection | ||
| 708-3060-ND | Switches the rover's main power state | ||
| CT206124-ND | Selects a rover operating mode | ||
| ED1682-24-ND | Provides a 24-position terminal connection | ||
| ED2580-ND | Provides a 2-position power terminal connection | ||
| S1012E-08-ND | Provides an 8-position board connection | ||
| S7000-ND | Provides a 2-position low-pitch board connection | ||
| S7078-ND | Provides a 20-position low-pitch board connection | ||
| S9175-ND | Provides a 40-position board connection | ||
| TSW-104-07-F-T-ND | Provides a 12-position board connection | ||
| WM13033-ND | Provides a mating plug for terminal connections | ||
| WM25701-ND | Provides a 6-position terminal connection | ||
| WM6548-ND | Provides a 20-position board connection | ||
| XT30 | Connects power, switch, and test equipment | ||
| LM358 | Amplifies and conditions control-board signals |