Connecting to sources…

CM6 compliant 3D-printed cobot arm · 6-axis 3D-printed cobot arm: six gimbal BLDC motors on low-ratio (5:1–9:1) printed planetary gearboxes (quasi-direct drive, passively compliant) with aluminium-extrusion links; the Hackaday spec list gives 5 kg and a 3 kg maximum load (at limited reach); the repo's DH model has a 280 mm upper arm, 250 mm forearm and 37.2 mm wrist (about 567 mm from shoulder to flange when stretched), while the reach field is left blank

6-axis 3D-printed cobot arm: six gimbal BLDC motors on low-ratio (5:1–9:1) printed planetary gearboxes (quasi-direct drive, passively compliant) with aluminium…

Maker
Source Robotics (Petar Crnjak, Zagreb, Croatia)
Form
6-axis 3D-printed cobot arm: six gimbal BLDC motors on low-ratio (5:1–9:1) printed planetary gearboxes (quasi-direct drive, passively compliant) with aluminium-extrusion links; the Hackaday spec list gives 5 kg and a 3 kg maximum load (at limited reach); the repo's DH model has a 280 mm upper arm, 250 mm forearm and 37.2 mm wrist (about 567 mm from shoulder to flange when stretched), while the reach field is left blank
For
Makers and researchers interested in robotics who have a 3D printer: the README says its main goal is to be a research platform for compliant and safe robotics, and warns that it is less refined than PAROL6, that some parts are hard to source and that it takes a lot of tinkering
Sensors
The BOM has no camera or microphone. In V2 every joint has a Spectral Micro BLDC driver, the control code is set up for 14-bit encoders, and the maker's blog says the new drivers sense current for torque control; V1's S-Drive used a 10-bit AS5040 encoder on the motor shaft with none on the gearbox output (Hackaday log)
Connectivity and app
No app: V2's six drivers are daisy-chained on a CAN bus and reach a computer through a USB-to-CAN adapter (slcan, 1 Mbit/s), and Python scripts read the bus and pass the data over UDP to a simulator (video description and CM6_V2_code); 24V power, with the Hackaday specs recommending a 24V 10A supply and a 5 A motor-current limit set by the driver
Subscription
Open-source project, no subscription
Openness
The CM6_COBOT_ROBOT repo is MIT (GitHub API and README) and holds zipped STEP models, a simplified SolidWorks assembly, the V2 BOM, an assembly PDF and the CM6_V2_code Python scripts (DH model, simulator, simulator mimic, keyboard control and communication tests); the README still lists “robot Python software and GUI” as coming soon. V1's GUI repo PCrnjak/CM6_control_software is MIT (last push 2023‑02). The repo of the Spectral Micro BLDC driver used in V2 is GPL‑3.0
Privacy
No camera or microphone and no cloud service; the control scripts run on a local computer.
Not stated
Reach (left blank in the Hackaday specs), payload at full reach, the V2 BOM total, assembly time, recommended age

Vendor claims

  • A cheap, open-source, safe and compliant 6-axis 3D-printed arm based on quasi-direct-drive BLDC actuators (Hackaday)
  • Quasi-direct drive makes it passively compliant like a human arm; the V2 video says this kind of compliance control suits human-robot collaboration and teleoperation
  • The first version costs about $1,000 in raw materials, and a later version could come down to $700–800

Parts

  • stm32f103c · Controls motor drive and communications
  • teensy 4.1 · Runs the robot's main control code
  • 100K NTC Thermistor · Measures controller or motor temperature
  • AS5040 · Measures the motor rotor angle
  • L6234 · Drives the three-phase BLDC motor
Parts and sources

Sources