InMoov · Life-size open-source 3D-printed humanoid (the standard build is an upper body on a pole stand, with optional non-motorised legs; far larger than a desk robot)
Life-size open-source 3D-printed humanoid (the standard build is an upper body on a pole stand, with optional non-motorised legs; far larger than a desk robot)…
- Maker
- Gaël Langevin (InMoov open-source project)
- Form
- Life-size open-source 3D-printed humanoid (the standard build is an upper body on a pole stand, with optional non-motorised legs; far larger than a desk robot)
- For
- Universities, laboratories and hobbyists, but first of all makers (inmoov.fr)
- Sensors
- Gaël's configuration (BOM page): two Hercules webcams, OAK‑D Lite, two HC‑SR04 ultrasonic sensors, PIR, ten finger pressure sensors, a Logitech H600 wireless headset and USB sound card; tutorials add Kinect and Leap Motion options
- Connectivity and app
- Controlled by MyRobotLab on a computer through two Arduino Megas and Nervo Boards (Gaël uses an Intel NUC with Windows 10 and Ubuntu), with a tablet as remote screen over a hotspot; a community Android app sends typed or spoken commands in chatbot mode. Cloud use is not described
- Subscription
- No subscription is mentioned; STL files are free to download
- Openness
- The 3D parts are CC BY‑NC 3.0 (Attribution‑NonCommercial), so commercial use is not allowed: the STL library states “InMoov Robot by Gaël Langevin is licensed under the Creative Commons Attribution‑Non‑Commercial license”, and Gaël writes in the shop that commercial companies may not sell parts of the robot. The MyRobotLab control software and its InMoov2 service are Apache‑2.0 (GitHub)
- Privacy
- Cameras, the depth camera and voice input connect to MyRobotLab on a local computer; whether cloud services are called is not described.
- Not stated
- Overall height and weight, total cost, total print time and filament, total servo count (the BOM lists servos by body section only), recommended age, languages, home city
Vendor claims
- The first open-source 3D-printed life-size robot
- Replicable on any home printer with a 12×12×12 cm build area
- A development platform for universities, labs and makers
Parts
- AH3503 · Detects the fingertip magnet position
- HC-SR04 · Measures obstacle distance using ultrasonic echo timing
- HC-SR501 · Detects infrared radiation to sense body motion
- HK15298 · Compatible servo for driving finger joints
- HK15298B · Drives robot joint motion
- HS805BB · Drives finger and arm joints
- JX PDI 1109MG · metal gear servo for head joints
- JX PDI 6221MG · small 180-degree servo for jaw and eyes
- JX-6225MG · Drives the wrist and finger mechanisms
- MG946r · Compatible servo for driving finger joints
- MG996 · Drives robot joint motion
- MG996r · Compatible servo for driving finger joints
- FC-14 · Connects servo breakout boards to the Nervo shield
- PCA9685 · I2C 16-channel servo driver board
- XT60 · power connector for servo supply
- Ecoflex 00-10 · soft silicone for casting the skin
Sources
- inmoov.fr/
- inmoov.fr/build-yours/
- inmoov.fr/default-hardware-map/
- inmoov.fr/inmoov-stl-parts-viewer/
- inmoov.fr/hand-i2/
- inmoov.fr/headi2/
- inmoov.fr/legs-non-motorized/
- inmoov.fr/remote-inmoov-with-your-phone/
- inmoov.fr/inmoov-with-ros/
- inmoov.fr/shop/
- inmoov.fr/product/nervo-board-components/
- inmoov.fr/product/finger-starter-kit/
- inmoov.fr/product/right-hand-v1/
- inmoov.fr/product/connectorv1/
- github.com/MyRobotLab/myrobotlab
- github.com/MyRobotLab/InMoov2