InMoov teardown: parts and sources
The 16 parts inside InMoov: AH3503, HC-SR04, HC-SR501, HK15298, HK15298B, HS805BB. Maker and distributor stock for each, with the source documents.
Gaël Langevin (InMoov open-source project) · i2
| Part | Maker | Use | Source |
|---|---|---|---|
| AH3503 | Detects the fingertip magnet position | ||
| HC-SR04 | Measures obstacle distance using ultrasonic echo timing | ||
| HC-SR501 | Detects infrared radiation to sense body motion | ||
| HK15298 | Compatible servo for driving finger joints | ||
| HK15298B | Drives robot joint motion | ||
| HS805BB | Hitec | Drives finger and arm joints | |
| JX PDI 1109MG | JX | metal gear servo for head joints | |
| JX PDI 6221MG | JX | small 180-degree servo for jaw and eyes | |
| JX-6225MG | JX | Drives the wrist and finger mechanisms | |
| MG946r | Compatible servo for driving finger joints | ||
| MG996 | Drives robot joint motion | ||
| MG996r | Compatible servo for driving finger joints | ||
| FC-14 | Connects servo breakout boards to the Nervo shield | ||
| PCA9685 | Adafruit | I2C 16-channel servo driver board | |
| XT60 | power connector for servo supply | ||
| Ecoflex 00-10 | Smooth-On | soft silicone for casting the skin |