Koch v1.1 low-cost robot arm (leader/follower pair) · Dynamixel-servo desktop arm used as a pair, a leader moved by hand and a follower that acts: 5 joints plus a gripper, 6 servos per arm, 3D-printed structure
Dynamixel-servo desktop arm used as a pair, a leader moved by hand and a follower that acts: 5 joints plus a gripper, 6 servos per arm, 3D-printed structure · …
- Maker
- Jess Moss open-source project (Hugging Face LeRobot tutorial) · original design by Alexander Koch
- Form
- Dynamixel-servo desktop arm used as a pair, a leader moved by hand and a follower that acts: 5 joints plus a gripper, 6 servos per arm, 3D-printed structure
- For
- Imitation-learning beginners and researchers; the LeRobot docs call it “a long-time community favorite”
- Sensors
- The BOM has no camera or microphone; joint angles come from the Dynamixel servos' position feedback, and the follower's gripper runs in current-based position mode (LeRobot driver). Cameras for recording data are not in the repo's BOM
- Connectivity and app
- Each arm has a Waveshare serial bus servo driver board connected to a computer over USB‑C; the follower runs on a 12V supply and the leader on 5V. LeRobot runs locally (robot type koch_follower, teleop type koch_leader), or the Dynamixel SDK can be used directly; no app and no cloud service
- Subscription
- Open-source project, no subscription
- Openness
- The GitHub API reports Apache‑2.0: the repo's LICENSE is a copy of LeRobot's licence, headed “Copyright 2024 The Hugging Face team” and followed by MIT notices for code LeRobot borrows (Diffusion Policy and others); the repo holds STL, STEP and SolidWorks models and a wiring-diagram PDF. The original AlexanderKoch-Koch/low_cost_robot is MIT. LeRobot's Koch drivers are Apache‑2.0
- Privacy
- No camera or microphone on the arms; LeRobot runs locally, footage from cameras added for recording goes into the dataset, and the user decides whether to upload it to the Hugging Face Hub.
- Not stated
- Reach, payload and weight, assembly time, filament cost, maker's location, kit price
Vendor claims
- An improved version of Alexander Koch's arm: fixed screw interferences, standardised hole sizes, no screws fastened into plastic
- A new DC converter means no soldering iron and no manual voltage adjustment during assembly
- A leader-arm platform lets the follower pick objects off the ground; SolidWorks models, a wiring diagram and an assembly video are included
Parts
- fpx330-h101 · Acts as the XL330 joint idler wheel.
- FPX330-S101 · Provides a purchased alternative to the printed follower part
- hn11-i101 · Acts as the XL430 joint idler wheel.
- XL330-M077 · Drives leader-arm joints and the trigger.
- XL330-M077-T · Drives six joints in the leader arm
- XL330-M288 · Drives the remaining follower joints and gripper.
- XL330-M288-T · Drives four joints in the follower arm
- XL430-W250 · Drives the first two follower-arm joints.
- XL430-W250-T · Drives two joints in the follower arm
Sources
- github.com/jess-moss/koch-v1-1
- github.com/jess-moss/koch-v1-1/blob/main/LICENSE
- github.com/jess-moss/koch-v1-1/tree/main/hardware
- github.com/jess-moss/koch-v1-1/tree/main/electrical
- github.com/AlexanderKoch-Koch/low_cost_robot
- huggingface.co/docs/lerobot/koch
- github.com/huggingface/lerobot/blob/main/src/lerobot/robots/koch_follower/koch_follower.py
- github.com/huggingface/lerobot/blob/main/docs/source/index.mdx
- github.com/TheRobotStudio/SO-ARM100