Connecting to sources…

ORCA Hand (orcahand v2) · Open-source tendon-driven five-finger dexterous hand — a hand only, not a whole robot: 17 DoF (16 tendon-driven finger joints plus a belt-driven wrist), 17 serial-bus servos, about 1.1 kg, mounted on a collaborative arm's ISO 9409-1 flange

Open-source tendon-driven five-finger dexterous hand — a hand only, not a whole robot: 17 DoF (16 tendon-driven finger joints plus a belt-driven wrist), 17 ser…

Maker
ORCA Dexterity, Inc. (Zurich) · v1 came from the ETH Zurich Soft Robotics Lab
Form
Open-source tendon-driven five-finger dexterous hand — a hand only, not a whole robot: 17 DoF (16 tendon-driven finger joints plus a belt-driven wrist), 17 serial-bus servos, about 1.1 kg, mounted on a collaborative arm's ISO 9409-1 flange
For
Dexterous-manipulation and robot-learning researchers; the site's community page names researchers from ETH Zurich, Stanford, UC Berkeley and other labs
Sensors
No dedicated sensors on the base hand: the 17 servos report position and each joint has its own tendon, so motor angles give finger pose to about ±5°. The touch hand has Hall-effect 6D force/torque fingertips on all five digits, 351 taxels in all (51–83 per finger), a closed-source module developed with an industry partner; the joint-encoder option adds an encoder at every joint (<1°, pre-order). Two 50 mm fans cool the tower
Connectivity and app
One power cable (12V 5A adapter) and one USB‑C cable to a computer; orca_core (Python) drives it over serial on the local machine, auto-detecting port, baud rate (1 Mbps on v2) and Dynamixel/Feetech motor type, on Linux, macOS and Windows 10/11. Tactile data has a web viewer, orca_ui. No app and no cloud service
Subscription
Open-source project, no subscription; assembled hands and BOM kits are one-off purchases
Openness
The GitHub API reports NOASSERTION for the hardware repo because its LICENSE opens with a copyright header; the text says every file in the repo (CAD/STL/3MF hardware designs and source code) is licensed CC BY 4.0, commercial use allowed, with the credit “ORCA Hand by ORCA Dexterity, Inc. — CC BY 4.0” and no patent or trademark rights; the v1 design files are CC BY 4.0 too. The orca_core controller, the orcahand_description models (MJCF/URDF), orca_retargeter and the orca_ui tactile viewer are MIT; orca_sim and orca_teleop declare no licence. The touch hand's tactile module is closed-source in hardware and firmware. The site states the orcahand name and logos are not covered by the open licences and commercial use needs written permission
Privacy
No camera or microphone on the hand; orca_core controls it locally over USB serial, and the repos mention no cloud service.
Not stated
Grip and fingertip force, finger speed, hand dimensions, v2 assembly time, total self-build cost (the official BOM sheet gives unit prices but no total), HL-2915 unit price, recommended age

Vendor claims

  • 17 independent joints, 16 tendon-driven in the fingers and a belt-driven wrist; the anthropomorphic layout allows in-hand manipulation
  • The same printed parts take Dynamixel or Feetech servos; build it from the open files or buy it assembled and calibrated
  • Durable: the v1 paper reports over 10,000 continuous cycles (about 20 hours) without hardware failure; the site says v2 ran pick-and-place for 7 h 17 min (about 2,000 grasps) with no human intervention

Parts

  • 686-2RS · Supports wrist rotation mechanism
  • HL-2915-Plastic · Drives each finger motor
  • HL-3930-Plastic · Drives the wrist motor
  • MR84ZZ-L-840ZZ · Guides finger and wrist transmission mechanisms
  • V1000 · Five-screw-hole spool
  • V1100 · Four-screw-hole spool
  • XC330-T288-T · Drives each finger tendon actuator
  • XC430-T240BB-T · Drives the wrist tendon actuator
  • smps-12v-5a-ps-10-us-110v · Supplies 12V power to the hand
  • EHR-3 · Connects the control board to actuators
  • FE-URT-2 · Controls actuators through USB-C
  • U2D2 · Additional board in the extended version
  • WFT 67 kg · Forms finger tendon transmission line
Parts and sources

Sources