Connecting to sources…

Sesame Robot (Sesame Robot Project) · 3D-printed open-source mini quadruped desk robot (8 servos + OLED face)

3D-printed open-source mini quadruped desk robot (8 servos + OLED face) · Dorian Todd (dorianborian) open-source project · Kit sold by Full Contact Engineering…

Maker
Dorian Todd (dorianborian) open-source project · Kit sold by Full Contact Engineering
Form
3D-printed open-source mini quadruped desk robot (8 servos + OLED face)
For
Makers and engineers of all skill levels; the site pitches it as a first robotics project
Sensors
No on-board sensors: the README lists ultrasonic, gyro and other sensor integration as welcome contributions; a 0.96-inch 128×64 SSD1306 OLED serves as the face
Connectivity and app
It opens its own Wi‑Fi access point and a captive-portal control panel appears on the phone; network mode joins home Wi‑Fi (sesame-robot.local) with a JSON API and a serial CLI, no app or Bluetooth pairing needed (official site). An optional Python companion app drives it over the LAN, using Google speech recognition and Gemini or a local LLM
Subscription
Open-source project, no subscription; the site promises “no region locks, no paywalls”
Openness
Apache‑2.0: Fusion 360 (.f3z) and STEP models, 15 STLs, EasyEDA schematics, Gerbers, BOMs and pick-and-place files for the Distro Board, the Arduino firmware and build docs are all in the main repo; Sesame Studio is Apache‑2.0 and the companion-app repo declares no licence
Privacy
No camera or microphone on the robot; access-point mode ships with the password 12345678 (firmware README) and network mode exposes a JSON API on the LAN; the optional companion app sends speech to Google speech recognition and Gemini, or to a local LLM.
Not stated
Recommended age, battery life, size and weight, filament cost, maker's location

Vendor claims

  • About $50–60 in hardware, built over a weekend
  • 8 servos with a 128×64 OLED face synced to movement
  • Wi‑Fi web control and a JSON API for voice assistants and home automation

Parts

  • ESP32 · Runs robot firmware and provides Wi-Fi connectivity
  • ESP32 Dev Module · Runs firmware, connects, and controls robot motion
  • ESP32 DevKit · Provides main processing for the legacy controller board
  • ESP32-DevKitC-32E · Runs firmware and controls the robot's actuators
  • ESP32-DevKitC-32E (ESP32-WROOM-32) · Legacy main controller with wireless connectivity
  • ESP32-S2 Mini · Main controller that drives the servos
  • ESP32-S3 · Main processor running robot firmware
  • ESP32-WROOM32 DevKitC · Runs firmware, connects, and controls robot motion
  • ESP32S3 Dev Module · Runs firmware, connects, and controls robot motion
  • Lolin S2 Mini · Runs firmware and controls the robot and its servos
  • S2 Mini · Alternative main module for hand-wired builds
  • SSD1306 · Displays robot status information
  • MG90 · Leg joint actuators providing eight total degrees of freedom
  • MG90S · Primary actuators for the hips and legs
  • 14500 Li-ion · Powers the robot
  • KCD1 · Controls robot power switching
  • B4B-XH-A(LF)(SN) · Replacement four-pin JST connector
  • CH340 · USB-to-serial bridge for connecting a computer to the controller
  • CP210x · USB-to-serial bridge for connecting a computer to the controller
  • Distro Board V1 · Legacy distribution board paired with the ESP32 development board
Parts and sources

Sources