Sesame Robot (Sesame Robot Project) teardown: parts and sources
The 26 parts inside Sesame Robot (Sesame Robot Project): ESP32, ESP32 Dev Module, ESP32 DevKit, ESP32-DevKitC-32E, ESP32-DevKitC-32E (ESP32-WROOM-32), ESP32-S2 Mini. Mak…
Dorian Todd (dorianborian) open-source project · Kit sold by Full Contact Engineering
| Part | Maker | Use | Source |
|---|---|---|---|
| ESP32 | Espressif Systems | Runs robot firmware and provides Wi-Fi connectivity | LCSC C701341 |
| ESP32 Dev Module | Espressif | Runs firmware, connects, and controls robot motion | |
| ESP32 DevKit | Espressif | Provides main processing for the legacy controller board | |
| ESP32-DevKitC-32E | Espressif | Runs firmware and controls the robot's actuators | LCSC C19183942 |
| ESP32-DevKitC-32E (ESP32-WROOM-32) | Espressif | Legacy main controller with wireless connectivity | |
| ESP32-S2 Mini | Lolin/WeMos | Main controller that drives the servos | |
| ESP32-S3 | Espressif | Main processor running robot firmware | LCSC C2913192 |
| ESP32-WROOM32 DevKitC | Espressif Systems | Runs firmware, connects, and controls robot motion | |
| ESP32S3 Dev Module | Espressif | Runs firmware, connects, and controls robot motion | |
| Lolin S2 Mini | Lolin | Runs firmware and controls the robot and its servos | |
| S2 Mini | Lolin | Alternative main module for hand-wired builds | |
| SSD1306 | Adafruit | Displays robot status information | |
| MG90 | Leg joint actuators providing eight total degrees of freedom | ||
| MG90S | Primary actuators for the hips and legs | ||
| 14500 Li-ion | Bambu Lab | Powers the robot | |
| KCD1 | Controls robot power switching | ||
| B4B-XH-A(LF)(SN) | JST | Replacement four-pin JST connector | LCSC C144395 |
| CH340 | USB-to-serial bridge for connecting a computer to the controller | ||
| CP210x | USB-to-serial bridge for connecting a computer to the controller | ||
| Distro Board V1 | Legacy distribution board paired with the ESP32 development board | ||
| JST-XH-4-PIN | JST | Original four-pin battery power connector | |
| V2 Distro board | Distributes power and connects the controller to eight motors | ||
| V3 Distro board | Distributes power and connects the controller to eight motors | ||
| XH2.54 | Links the battery, switch, and PCB | ||
| XT30 | Forms a pluggable battery adapter lead | ||
| XY302V-3.5-2P | Replacement 5-12V screw terminal |