PingTi Arm (low-cost human-arm-scale robot arm) · A lengthened SO‑100 desktop arm: 5 joints plus a gripper driven by 8 Feetech bus servos (the shoulder pairs 2 STS3250s and the elbow pairs 2 STS3215s), with a 3D-printed structure
A lengthened SO‑100 desktop arm: 5 joints plus a gripper driven by 8 Feetech bus servos (the shoulder pairs 2 STS3250s and the elbow pairs 2 STS3215s), with a …
- Maker
- Wang Zhenxuan (nomorewzx) open-source project · based on The Robot Studio's SO‑100
- Form
- A lengthened SO‑100 desktop arm: 5 joints plus a gripper driven by 8 Feetech bus servos (the shoulder pairs 2 STS3250s and the elbow pairs 2 STS3215s), with a 3D-printed structure
- For
- Imitation-learning hobbyists who have used an SO‑100 and want a longer reach and more payload; the README strongly recommends that beginners start with the SO‑100
- Sensors
- The BOM has no camera or microphone; joint angles come from the servos' position feedback. The pingti_lerobot_bridge tutorial adds an OpenCV camera for teleoperation and dataset recording, which is not in the BOM
- Connectivity and app
- A Feetech USB bus servo board connects to a computer and takes a 12V supply (the creator says Feetech confirmed the V1 port, labelled 6–9V, is safe at 12V); LeRobot runs locally with robot type pingti_follower and an so100_leader as the leader; no app and no cloud service
- Subscription
- Open-source project, no subscription
- Openness
- The GitHub API reports Apache‑2.0 (a repo-level LICENSE added in 2025‑03), covering 12 STLs (7 marked as copied directly from the SO‑100 repo, itself Apache‑2.0), an editable Fusion 360 assembly and v3/v4 URDFs. The LeRobot bridge pingti_lerobot_bridge is Apache‑2.0, and the fruit-picking dataset the creator published on Hugging Face is tagged apache-2.0
- Privacy
- No camera or microphone on the arm; LeRobot runs locally, footage from an added camera goes into the dataset, and the user decides whether to upload it to the Hugging Face Hub.
- Not stated
- Measured weight (the URDF's 0.988 kg is a modelling estimate), repeatability, assembly time, filament cost, the creator's location, kit price
Vendor claims
- A human-arm-scale arm based on the SO‑100 and compatible with LeRobot: a 600 mm span (excluding the end effector) and up to 500 g of payload at full span
- Works as a follower paired with an SO‑100 leader, with teleoperation and data collection through pingti_lerobot_bridge
- About $261 for one arm and about $390 for a leader/follower pair; an SO‑100 follower built with 12V 30 kg·cm servos needs only 2 more servos and a driver board (about $157)
Parts
- ST-3215 · Drives elbow, wrist, and gripper joints
- ST-3250 · Drives shoulder joints with 50 kg·cm torque
- STS3215 · Acts as a servo for arm joints
- STS3250 · Acts as a servo for arm joints
Sources
- github.com/nomorewzx/PingTi-Arm
- github.com/nomorewzx/PingTi-Arm/blob/main/docs/README_CN.md
- github.com/nomorewzx/PingTi-Arm/blob/main/docs/BOM_List.md
- github.com/nomorewzx/PingTi-Arm/blob/main/docs/BOM_List_CN.md
- github.com/nomorewzx/PingTi-Arm/blob/main/docs/3d_print.md
- github.com/nomorewzx/PingTi-Arm/blob/main/docs/Assembe_tutorial.md
- github.com/nomorewzx/PingTi-Arm/blob/main/docs/URDF_SIM.md
- github.com/nomorewzx/PingTi-Arm/blob/main/LICENSE
- github.com/nomorewzx/pingti_lerobot_bridge
- github.com/nomorewzx/pingti_lerobot_bridge/blob/main/docs/pingti_lerobot_bridge_tutorial.md
- huggingface.co/datasets/zhenxuan/PingTi-OrchardPick-Jujube
- github.com/TheRobotStudio/SO-ARM100