EDA-Robot dog · ESP8266 beginner soldering course robot dog (4 servos, a 0.96-inch OLED face, a through-hole PCB of 48×87 mm)
ESP8266 beginner soldering course robot dog (4 servos, a 0.96-inch OLED face, a through-hole PCB of 48×87 mm) · LCEDA course-examples team (JLC EDA) · No camer…
- Maker
- LCEDA course-examples team (JLC EDA)
- Form
- ESP8266 beginner soldering course robot dog (4 servos, a 0.96-inch OLED face, a through-hole PCB of 48×87 mm)
- For
- Soldering and embedded beginners and classroom teaching (OSHWHub page: very suitable for beginner soldering, suited to teaching)
- Sensors
- No camera or microphone: two tact buttons (GPIO2, GPIO15) and battery-voltage sensing on the ADC (from PCB V1.2); a 0.96-inch OLED (SSD1306/SSD1315, 128×64, I2C) shows faces, a clock and the weather; PCB V1.3 adds a 5V port for an external voice module
- Connectivity and app
- It opens its own Wi‑Fi hotspot named EDA-Robot and a phone browser at 192.168.4.1 reaches the remote page (stored in SPIFFS, flashed separately); after you enter home Wi‑Fi, a city and a Seniverse weather API key on the settings page, the clock syncs over NTP and the weather comes from the Seniverse API; the FAQ says everything else works offline
- Subscription
- No subscription; the weather feature needs your own Seniverse API key, whose cost the pages do not state
- Openness
- The OSHWHub licence field reads GPL 3.0, and the schematic and PCB project (EasyEDA Pro), Gerbers, BOMs, 3D files, firmware and source are in the attachments and resource pack; the same page's IP notice says the project is “only for platform users to learn, exchange and research, excluding any commercial use; do not use it for commercial sale or other profit-making purposes”. The Gitee source repo JasonYANG170/eda-robot declares no licence; the shell also exists as a JLC cloud CAD project
- Privacy
- No camera or microphone; the firmware's hotspot is named EDA-Robot with an empty password, so anyone who joins can drive it; the settings page stores the Wi‑Fi password, city and weather API key in the device's SPIFFS, and weather requests go to Seniverse over plain HTTP.
- Not stated
- Official price (no official kit), size and weight, battery life, assembly time, recommended age
Vendor claims
- Mostly through-hole parts: cheap, easy for beginners to solder and suited to teaching
- About CN¥30 without batteries, mainly CN¥12 of servos, a CN¥4.5 screen and a CN¥4 controller
- A phone-controlled desk pet that shows faces, a clock and the daily weather
Parts
- ESP-12F · Wi-Fi module carrying the ESP8266 processor
- ESP8266 · Main controller with built-in Wi-Fi
- NodeMCU 1.0 · Hosts the ESP8266 processor and expansion interfaces.
- HS96L03W2C03 · Displays images and information through IIC
- SSD1306 · Compatible OLED display driver
- SSD1315 · Drives OLED expressions, clock, and weather
- MG-90 · Drives the robot dog's joints
- SG-90 · Drives the robot dog's joints
- SG90-180° · Drives robot joints and produces movement
- AMS1117-3.3V · Regulates 8.4 V down to 3.3 V
- AMS1117-5V · Regulates 8.4 V down to 5 V
- SK12D07VG5 · Controls power switching for the circuit
- CH340 · Converts USB to serial for firmware downloading.
Sources
- oshwhub.com/course-examples/bot-dog
- wiki.lceda.cn/zh-hans/course-projects/smart-internet/eda-robot/eda-robot-hardware.html
- wiki.lceda.cn/zh-hans/course-projects/smart-internet/eda-robot/eda-robot-software.html
- wiki.lceda.cn/zh-hans/course-projects/smart-internet/eda-robot/eda-robot-enclosure.html
- gitee.com/JasonYANG170/eda-robot
- gitee.com/JasonYANG170/eda-robot/releases/download/v1.0/%E8%B5%84%E6%BA%90%E5%8C%85.zip