Amazing Hand (AH!) · Open-source 3D-printed humanoid robot hand — a hand only, not a whole robot: 4 fingers, 8 DoF, all 8 servos inside the hand, about 400 g; the wrist interface is made for Reachy 2's wrist, with a community SO-ARM adapter
Open-source 3D-printed humanoid robot hand — a hand only, not a whole robot: 4 fingers, 8 DoF, all 8 servos inside the hand, about 400 g; the wrist interface i…
- Maker
- Pollen Robotics (designer Jérémy Laville) · Kit sold by Seeed Studio and WowRobo
- Form
- Open-source 3D-printed humanoid robot hand — a hand only, not a whole robot: 4 fingers, 8 DoF, all 8 servos inside the hand, about 400 g; the wrist interface is made for Reachy 2's wrist, with a community SO-ARM adapter
- For
- Researchers, students and makers who want to experiment with an anthropomorphic hand at low cost (official blog and Seeed kit page)
- Sensors
- No dedicated sensors on the hand; the SCS0009 servos switch torque on and off and report position, torque and temperature (README). Fingertip sensors are still on the README to-do list; the hand-tracking demo uses an ordinary webcam on the computer
- Connectivity and app
- Serial-bus control: a serial servo driver board such as Waveshare's with Python on a computer, or an Arduino with a Feetech TTL Linker; an external supply is required (5V/2A for the original, 6V/2A for Enhanced). The Seeed kit adds a XIAO-compatible servo driver board and a 12V 3A adapter. No app and no cloud service
- Subscription
- Open-source project, no subscription
- Openness
- Code is Apache‑2.0 (GitHub API; LICENSE files at the root and in Demo/) and the mechanical design (STLs, STEP and the public Onshape document) is CC BY 4.0 (README); the BOM spreadsheet, 3D-printing guide and assembly PDF are public. Demo/ holds a Rust control node (dora-rs), MuJoCo + Mink inverse-kinematics simulation and webcam hand tracking; the Enhanced branch uses the same licences
- Privacy
- No camera or microphone on the hand; the hand-tracking demo processes webcam frames locally with OpenCV and MediaPipe, and the repo mentions no cloud service.
- Price
- USD 99 (2026-11-22)
- Not stated
- Grip force and payload, finger speed, assembly time, recommended age, whether Seeed's price includes tax (not stated; the checkout note says buyers pay duties and import taxes under DAP terms), WowRobo kit contents
Vendor claims
- Four fingers and 8 DoF with every actuator inside the hand, no forearm cables
- Fully 3D-printable, about 400 g, under €200 in parts
- Aimed at research and education: AI experiments, data collection and algorithm validation (Seeed kit page)
Parts
- ATmega2560 · Controls the hand and communicates with servos
- XIAO ESP32-C3 · Reads strain-gauge signals and sends them serially
- XIAO ESP32-S3 · Reads strain-gauge signals and sends them serially
- D2x10 · Serves as a finger-joint pivot
- D2x16 · Serves as a finger-joint pivot
- GFM 0608-04 · Supports shafts and reduces friction
- L300mm · Forms the hand's linear transmission linkage
- M2 L19 · Connects and rotates finger linkages
- M2 x L19 · Connects linkages and transmits motion
- M3xL29mm · Alternative joint connects finger linkages
- SCS0009 · Drives finger flexion, extension, abduction, and adduction.
- SG90 · Servo used in a community force-control hand variant.
- STS3032 · Stronger alternative servo proposed for finger actuation.
Sources
- github.com/pollen-robotics/AmazingHand
- github.com/pollen-robotics/AmazingHand/releases/tag/v1.0
- github.com/pollen-robotics/AmazingHand/tree/Amazing-Hand-Enhanced/AmazingHand_Enhanced
- docs.google.com/spreadsheets/d/1QH2ePseqXjAhkWdS9oBYAcHPrxaxkSRCgM_kOK0m52E/edit?gid=1269903342
- docs.google.com/spreadsheets/d/180ta_jQhF-YGHinabTnSPGtvGcQORVJ9lFrNiKcSqUE/edit?gid=1269903342
- huggingface.co/blog/pollen-robotics/amazing-hand
- seeedstudio.com/Amazing-Hand-Right-Hand-The-Open-Source-Robotic-Hand-Developer-Kit.html
- seeedstudio.com/Amazing-Hand-Open-Source-3D-Printable-Robotic-Hand-Kit.html
- wiki.seeedstudio.com/hand_amazinghand/
- shop.wowrobo.com/products/amazing-hand-the-open-source-robotic-hand-kit
- github.com/pollen-robotics