Connecting to sources…

PAROL6 3D-printed desktop 6-axis robot arm · A desktop arm with 6 revolute joints: one NEMA 17 stepper per joint, driven through planetary gearboxes (joints 2, 3, 6) and HTD3 belts (joints 1, 3, 4, 5), with PETG printed links on steel shafts and bearings; the manual gives a 408 mm reach (to the flange; 434 mm to the standard pneumatic gripper's TCP), a payload of 1 kg near the base and 0.5 kg across the full workspace (tool included), 0.1 mm repeatability and 5.5 kg, with no joint encoders and no brakes

A desktop arm with 6 revolute joints: one NEMA 17 stepper per joint, driven through planetary gearboxes (joints 2, 3, 6) and HTD3 belts (joints 1, 3, 4, 5), wi…

Maker
Source Robotics d.o.o. (Petar Crnjak, Zagreb, Croatia)
Form
A desktop arm with 6 revolute joints: one NEMA 17 stepper per joint, driven through planetary gearboxes (joints 2, 3, 6) and HTD3 belts (joints 1, 3, 4, 5), with PETG printed links on steel shafts and bearings; the manual gives a 408 mm reach (to the flange; 434 mm to the standard pneumatic gripper's TCP), a payload of 1 kg near the base and 0.5 kg across the full workspace (tool included), 0.1 mm repeatability and 5.5 kg, with no joint encoders and no brakes
For
The manual says it is for education, research, hobby robotics and light bench automation (teaching robot programming, camera and sensor experiments, prototyping a task before buying an industrial arm), and says not to use it around people who do not know it is a robot (children, visitors, a crowded desk). The store says users need basic terminal, Git and Python skills
Sensors
No camera or microphone on the arm; joints 2, 3 and 5 home on limit switches and joints 1, 4 and 6 on inductive sensors, and position is counted in steps with no joint encoders, so a lost step is silent (manual). Camera and vision demos are community projects
Connectivity and app
The PAROL6 control board in the base (STM32F446, six TMC5160 drivers) talks to a PC over USB (serial, 3 Mbaud) and exchanges a packet every 10 ms; kinematics, trajectory planning and the interface run on the PC (manual). The Python API's controller runs on the PC with the USB link, and clients can be anywhere on the network. 24V DC at 5 A or more, about 40 W typical; USB does not power the board. No mobile app and no cloud service
Subscription
Open-source project and a one-off purchase of the arm or a kit; no subscription
Openness
The robot repository (STLs, BOM, assembly instructions, main and test control-board firmware) is GPL‑3.0; the Python API (PCrnjak/PAROL6-python-API) and the Commander software are GPL‑3.0; the ROS 2 MoveIt configuration is MIT; the URDF and MuJoCo models (robot_descriptions) are CC BY 4.0; the manual's text and images are CC BY‑SA 4.0 and its code examples MIT. Not open: the control board's schematics and PCB (the manual says licensing and confidentiality terms with development partners keep them private) and the per-part STEP files, which the official store sells for €23 and calls “not open source … should not be shared without permission”
Privacy
No camera or microphone on the arm; the control software and Python API run on a local PC with no cloud service.
Price
EUR 3000 (2026-11-22)
Not stated
Total print time and filament (the print table gives times and masses for only some parts), assembly time, a total for the repo BOM (it lists no prices), recommended age

Vendor claims

  • A high-performance 3D-printed desktop arm designed to be like industrial robots in mechanics, control software and usability; the control software, GUI and STL files are open source (README)
  • Built with education, research and small automation in mind: teaching robot programming, camera and sensor experiments, and prototyping a task before buying an industrial arm (store page and manual)
  • Buy it assembled, as a full kit or as a partial kit of the hard-to-find parts, or print and build one from the published files

Parts

  • STM32F446 · Main microcontroller for robot control
  • GX-F8A · Detects nearby metal position
  • ZW12-3 · Detects joint travel limits
  • AXK3552 · Supports shafts and reduces friction
  • HR32906J · Supports joints 5, 4, and 3
  • HR32907J · Supports joints 1 and 2
  • HTD3 201 · Transmits joint 4 rotation
  • HTD3 246 · Transmits joint 5 rotation
  • HTD3 342 · Transmits joint 3 rotation
  • HTD3 396 · Transmits joint 1 rotation
  • HTD3M 12 tooth · Transmits joint 4 and 5 motion
  • HTD3M 15 tooth · Transmits joint 1 motion
  • MHZ2-16D · Grips and moves objects
  • TMC5160 · Drives the joint stepper motors
  • GX16 · Connects external 24V power
  • xt30 · Delivers power to the PCB
  • PC4 - M5 · Connects the pneumatic gripper to tubing
  • PG7 · Secures and seals the estop cable
  • NF-A4x20 · Cools the robot control board
  • SSG-48 · Flange-mounted electric gripper grasps and transfers workpieces
Parts and sources

Sources