Maker's Pet Mini (LiDAR ROS 2 education robot) · Two-wheel differential-drive robot on a 120 mm round 3D-printed base, about 86 mm tall to the top of the LiDAR: an ESP32 runs Arduino + micro-ROS firmware under a 360° 2D LiDAR, while mapping and navigation run in ROS 2 on a computer on the same Wi‑Fi
Two-wheel differential-drive robot on a 120 mm round 3D-printed base, about 86 mm tall to the top of the LiDAR: an ESP32 runs Arduino + micro-ROS firmware unde…
- Maker
- Maker's Pet (Kaia.ai open-source platform)
- Form
- Two-wheel differential-drive robot on a 120 mm round 3D-printed base, about 86 mm tall to the top of the LiDAR: an ESP32 runs Arduino + micro-ROS firmware under a 360° 2D LiDAR, while mapping and navigation run in ROS 2 on a computer on the same Wi‑Fi
- For
- Technically inclined high-schoolers, college students and adult robotics enthusiasts (store page), with no prior Arduino or ROS 2 knowledge needed; the about page says customers are mostly college students, educators, DIY enthusiasts and universities
- Sensors
- LDROBOT LD14P 360° 2D LiDAR (optional in the kit, or bring your own; the firmware also supports YDLIDAR X2/X3/X4/SCL, RPLIDAR A1, Xiaomi LDS02RR, Neato XV11, 3irobotix Delta, Camsense X1, LD19 and others); quadrature encoders on both N20 motors; battery voltage read by the ESP32 ADC. The store's parts list has no camera, microphone or IMU
- Connectivity and app
- No app and no cloud: the ESP32 joins 2.4 GHz Wi‑Fi only and connects over micro-ROS to ROS 2 on a computer on the local network (Windows uses WSL2 with the kaiaai/kaiaai:iron Docker image; Linux can install ROS 2 Iron or Jazzy directly); for first setup the ESP32 opens a KAIA.AI hotspot with a form at 192.168.4.1. The store asks for a Windows PC with 8 GB+ RAM or a Linux PC with 4 GB+
- Subscription
- No subscription; the firmware and ROS 2 software are free and open source (Apache‑2.0)
- Openness
- The about page says all products are open source, and the build guide says all Maker's Pet software is Apache‑2.0. On GitHub the ESP32 firmware kaiaai/firmware, the ROS 2 package and kaia CLI kaiaai/kaiaai, the install scripts and Docker files kaiaai/install, the LiDAR library kaiaai/LDS, the micro-ROS library and the Mini's ROS 2 description package makerspet_mini are all Apache‑2.0. Hardware files sit in the makerspet/store repo (Apache‑2.0): 3MF print files and STEP models for the body, wheels and motor clamps, plus Fusion 360 source (.f3z); the BDC‑30P driver board publishes only a schematic PDF and a STEP outline model, with no PCB layout or Gerber files in the repo
- Privacy
- No camera or microphone. LiDAR scans and maps are processed and stored on the ROS 2 computer on the local network, and the docs mention no cloud service. Wi‑Fi credentials are kept in network.yaml on the ESP32; the build guide warns against committing or publishing a Docker image that contains them.
- Price
- USD 77 (2026-11-22)
- Not stated
- Battery life (only currents are given: about 240 mA idle and 430–450 mA with both motors spinning freely at full speed, on 9V), top speed, recommended age (the store suggests high-schoolers and up and warns that small parts must be kept away from small children), the driver board's motor-driver chip; two weights are given (about 12 oz with screws in the description, 0.82 lb in the spec table)
Vendor claims
- Learn professional robotics basics hands-on by building an Arduino and ROS 2 robot, with no prior Arduino or ROS 2 knowledge
- LiDAR room mapping, self-driving on a saved map, or exploring autonomously while mapping
- Built on open-source ROS 2 and programmable in C++ or Python; firmware, software and print files are all public
- Zero-to-hero assembly, setup, bring-up and operation videos, a PDF e-book and a troubleshooting guide
Parts
- Arduino Nano V3 · Runs ROS 2 and controls the robot
- CM4 · Acts as the main ROS 2 compute module.
- CM5 · Acts as the main ROS 2 compute module.
- ESP32 · Runs the robot controller and ROS2 communications firmware
- ESP32 Nano · Arduino-compatible ESP32 controller board
- ESP32-DOIT-DevKit-V1 · Runs robot control and ROS 2 communication
- ESP32E · Provides the ESP32E development board for robot control
- MINI-32E · Maker's Pet Mini main control board
- MINI-S3M · Maker's Pet Mini main control board
- Raspberry Pi 4 · Runs ROS 2 mapping and navigation locally.
- A1 · Provides 360-degree distance scans for room mapping
- Delta-2A · Measures distance and detects nearby obstacles
- Delta-2B · LiDAR distance sensor for robot mapping
- Delta-2G · 2D laser scanner for mapping and navigation
- LD14P · Scans surroundings and measures distance
- LD19 · spinning LiDAR distance sensor
- LDS02RR · Measures distance for mapping and obstacle avoidance
- RPLIDAR A1 · 360-degree LiDAR scanner for mapping
- X1 · LiDAR distance sensor
- X2 · 360-degree 2D laser scanner for mapping and navigation
Sources
- makerspet.com/
- makerspet.com/store/
- makerspet.com/product/arduino-ros2-self-driving-robot-120mm-build-pack/
- makerspet.com/product/driver-board-for-esp32-doit-devkit-v1-brushed-dc-motors-and-lidar/
- makerspet.com/blog/bld-120mm-pack/
- makerspet.com/about/
- makerspet.com/shipping-returns-policy/
- github.com/makerspet/makerspet_mini
- github.com/makerspet/store
- github.com/makerspet/ebook
- github.com/kaiaai/firmware
- github.com/kaiaai/firmware/releases
- github.com/kaiaai/kaiaai
- github.com/kaiaai/install
- github.com/kaiaai/LDS
- github.com/makerspet/makerspet_loki
- github.com/makerspet/makerspet_snoopy
- github.com/makerspet/makerspet_fido
- github.com/makerspet/3d_models
- oomwoo.com/
- youtube.com/watch?v=RCPUQmvS37Q
- youtube.com/watch?v=6GtjAB19GP8