Maker's Pet Mini (LiDAR ROS 2 education robot) teardown: parts and sources
The 50 parts inside Maker's Pet Mini (LiDAR ROS 2 education robot): Arduino Nano V3, CM4, CM5, ESP32, ESP32 Nano, ESP32-DOIT-DevKit-V1. Maker and distributor stock for e…
Maker's Pet (Kaia.ai open-source platform) · BLD-120MM-PACK
| Part | Maker | Use | Source |
|---|---|---|---|
| Arduino Nano V3 | Arduino | Runs ROS 2 and controls the robot | |
| CM4 | Raspberry Pi | Acts as the main ROS 2 compute module. | |
| CM5 | Raspberry Pi | Acts as the main ROS 2 compute module. | |
| ESP32 | Arduino | Runs the robot controller and ROS2 communications firmware | LCSC C701341 |
| ESP32 Nano | Espressif | Arduino-compatible ESP32 controller board | |
| ESP32-DOIT-DevKit-V1 | DOIT | Runs robot control and ROS 2 communication | |
| ESP32E | Espressif | Provides the ESP32E development board for robot control | |
| MINI-32E | Maker's Pet | Maker's Pet Mini main control board | |
| MINI-S3M | Maker's Pet | Maker's Pet Mini main control board | |
| Raspberry Pi 4 | Raspberry Pi | Runs ROS 2 mapping and navigation locally. | |
| A1 | RPLIDAR | Provides 360-degree distance scans for room mapping | |
| Delta-2A | 3irobotix | Measures distance and detects nearby obstacles | |
| Delta-2B | LiDAR distance sensor for robot mapping | ||
| Delta-2G | 3irobotix | 2D laser scanner for mapping and navigation | |
| LD14P | LDROBOT | Scans surroundings and measures distance | |
| LD19 | LDROBOT | spinning LiDAR distance sensor | |
| LDS02RR | Xiaomi | Measures distance for mapping and obstacle avoidance | |
| RPLIDAR A1 | SLAMTEC | 360-degree LiDAR scanner for mapping | |
| X1 | Camsense | LiDAR distance sensor | |
| X2 | YDLIDAR | 360-degree 2D laser scanner for mapping and navigation | |
| X2/X2L | YDLIDAR | Scans room distances and builds maps | |
| X2L | YDLIDAR | 360-degree 2D laser scanner for mapping and navigation | |
| X3 | YDLIDAR | Provides 360-degree distance scans for room mapping | |
| X3PRO | YDLIDAR | 360-degree 2D laser scanner for mapping and navigation | |
| X4 | YDLIDAR | Provides 360-degree distance scans for room mapping | |
| X4-PRO | YDLIDAR | scanning LiDAR for robot navigation | |
| XV11 | Neato | Provides 360-degree distance scans for room mapping | |
| YDLIDAR X3 | YDLIDAR | 360-degree 2D laser scanner for mapping and navigation | |
| BDC-30P | Maker's Pet | Drives both N20 motors and supplies motor power | |
| BDC-38C4 | Maker's Pet | Brushed DC motor driving the robot wheel | |
| CHR-GM25-BL2418 | 24V BLDC gearmotor with encoder output | ||
| DRV8833 | dual H-bridge brushed DC motor driver | ||
| DRV8835 | dual H-bridge motor driver with current regulation | ||
| DRV8871 | single H-bridge brushed DC motor driver | ||
| GA25-370 | brushed DC gearmotor with quadrature encoder | ||
| JGA25-2418 | 24V BLDC gearmotor with built-in encoder | ||
| JGA25-2430 | 24V BLDC gearmotor with built-in encoder | ||
| JGA25-BL2418 | 24V BLDC gearmotor with built-in encoder | ||
| L298N | dual H-bridge driver for brushed DC motors | ||
| LM298N | dual H-bridge driver for brushed DC motors | ||
| N20 | Drives the wheels and provides encoder feedback | ||
| N20-ENC | Encoder giving N20 motor speed feedback | ||
| TB6612FNG | dual H-bridge motor driver with PWM | ||
| WHEEL-43MM | 43 mm wheel transmitting motor torque | ||
| BAT-HLD-2X18650 | Battery holder for two 18650 cells | ||
| BAT-HLD-3x2AA | Battery holder for six AA cells | ||
| BLD-PACK-120MM | 120 mm wheel and drive pack | ||
| BRK-30P | Bracket mounting the 30P motor assembly | ||
| LDS02RR-ADPT-V030 | Adapter plate mounting the LDS02RR LiDAR unit | ||
| N20-CLAMPS | Clamp set fixing the N20 motor in place |