Connecting to sources…

TurtleBot3 (Burger / Waffle Pi) · Open-source ROS two-wheeled differential-drive robot kit (Burger / Waffle Pi, shipped unassembled)

Open-source ROS two-wheeled differential-drive robot kit (Burger / Waffle Pi, shipped unassembled) · ROBOTIS (in partnership with Open Robotics) · Both models …

Maker
ROBOTIS (in partnership with Open Robotics)
Form
Open-source ROS two-wheeled differential-drive robot kit (Burger / Waffle Pi, shipped unassembled)
For
Education, research, hobby projects and product prototyping; aimed at people starting with ROS (e-Manual)
Sensors
Both models carry a 360° LDS‑03 lidar (the store says it replaced the LDS‑02 from 2025; 0.05–12 m, 10 Hz, 0.9° resolution), a 3-axis gyroscope and 3-axis accelerometer on the OpenCR board, and DYNAMIXEL encoders; Waffle Pi adds a Raspberry Pi Camera v2.1, Burger has no camera; the spec table lists no microphone, only programmable beeps
Connectivity and app
A Raspberry Pi 4 on board runs ROS 2 and talks over Wi‑Fi to a remote PC on the same network (the manual recommends ROS_DOMAIN_ID 30 on both); the OpenCR board connects to the Pi by USB; Waffle Pi comes with an RC‑100B remote and BT‑410 Bluetooth (BLE) module. The manual's workflow involves no app or cloud service
Subscription
Neither the store nor the e-Manual mentions a subscription; the ROS 2 packages are free under Apache‑2.0
Openness
The e-Manual says the hardware, firmware and software are all open source. On GitHub, turtlebot3, turtlebot3_msgs, turtlebot3_simulations, the LDS‑03 driver coin_d4_driver and the DYNAMIXEL SDK are Apache‑2.0; the OpenCR firmware (with its turtlebot3_ros2 library) is Apache‑2.0; the OpenCR schematics, Gerber and BOM repo (OpenCR-Hardware) declares no licence, its README only saying “free to distribute under open-source licenses”; the full 3D CAD is a public Onshape document from ROBOTIS OpenSourceTeam with no licence stated
Privacy
Burger has no camera or microphone; Waffle Pi carries a Raspberry Pi camera. The robot and the remote PC talk ROS 2 over the same Wi‑Fi network, and the manual's workflow does not use the cloud.
Price
USD 783.5 (2026-11-22)
Not stated
Recommended age, CNY price, assembly time, the specific licence of the Onshape CAD and OpenCR hardware files, tax

Vendor claims

  • The world's most popular ROS platform and the standard one for ROS education and research
  • The most affordable SLAM-capable mobile robot, with a 360° lidar
  • Hardware, firmware and software are all open source, with 3D CAD for 3D printing

Parts

  • OpenCR1.0 · Controls actuators and sensors and supplies board power
  • Raspberry Pi 4 · Serves as the standard onboard single-board computer
  • STM32F7 · Main MCU with floating-point unit
  • STM32F746ZGT6 · Runs the robot's main embedded control firmware
  • BT-410 · Provides Bluetooth wireless communication for the controller
  • COIN-D4 · 360-degree laser distance scanning for mapping
  • LD08 · 360-degree laser distance scanning for mapping
  • LDS-01 · Laser distance sensor for measuring surrounding distances
  • LDS-02 · Provides 360-degree laser ranging for SLAM
  • LDS-03 · 360-degree laser scanning for mapping and navigation
  • AS5601 · Measures absolute motor position without contact
  • ICM-20648 · Measures three-axis angular rate and acceleration
  • MPU9250 · Measures three-axis orientation, acceleration, and magnetism
  • XL430-W250 · Drives Burger wheels with velocity control
  • XM430-W210 · Drives Waffle Pi wheels with velocity control
  • SMW250-02 · Provides the onboard 12-volt power output
  • 20010WS-02 · Provides the 3.3-volt power output connection
  • 20010WS-04 · Provides UART and CAN expansion connections
  • B3B-EH-A · Connects the DYNAMIXEL TTL serial interface
  • B4B-EH-A · Connects the DYNAMIXEL RS485 interface
Parts and sources

Related news and research

Sources