TurtleBot3 (Burger / Waffle Pi) teardown: parts and sources
The 21 parts inside TurtleBot3 (Burger / Waffle Pi): OpenCR1.0, Raspberry Pi 4, STM32F7, STM32F746ZGT6, BT-410, COIN-D4. Maker and distributor stock for each, with the s…
ROBOTIS (in partnership with Open Robotics) · TurtleBot 3 Waffle Pi RPi4 2GB [US]
| Part | Maker | Use | Source |
|---|---|---|---|
| OpenCR1.0 | ROBOTIS | Controls actuators and sensors and supplies board power | |
| Raspberry Pi 4 | Raspberry Pi | Serves as the standard onboard single-board computer | |
| STM32F7 | Main MCU with floating-point unit | ||
| STM32F746ZGT6 | Runs the robot's main embedded control firmware | ||
| BT-410 | Provides Bluetooth wireless communication for the controller | ||
| COIN-D4 | 360-degree laser distance scanning for mapping | ||
| LD08 | 360-degree laser distance scanning for mapping | ||
| LDS-01 | Laser distance sensor for measuring surrounding distances | ||
| LDS-02 | Provides 360-degree laser ranging for SLAM | ||
| LDS-03 | ROBOTIS | 360-degree laser scanning for mapping and navigation | |
| AS5601 | ams | Measures absolute motor position without contact | LCSC C5355515 |
| ICM-20648 | Measures three-axis angular rate and acceleration | ||
| MPU9250 | Measures three-axis orientation, acceleration, and magnetism | ||
| XL430-W250 | Drives Burger wheels with velocity control | ||
| XM430-W210 | Drives Waffle Pi wheels with velocity control | ||
| SMW250-02 | Provides the onboard 12-volt power output | ||
| 20010WS-02 | Provides the 3.3-volt power output connection | ||
| 20010WS-04 | Provides UART and CAN expansion connections | ||
| B3B-EH-A | Connects the DYNAMIXEL TTL serial interface | ||
| B4B-EH-A | Connects the DYNAMIXEL RS485 interface | ||
| RC-100B | Provides Bluetooth robot remote control |