OpenBot (open-source smartphone robot car) teardown: parts and sources
The 13 parts inside OpenBot (open-source smartphone robot car): ATmega328P, ESP32, ESP32 Dev Module, PS3/4, PS4, X3. Maker and distributor stock for each, with the sourc…
OpenBot Foundation (originally an Intel Intelligent Systems Lab project)
| Part | Maker | Use | Source |
|---|---|---|---|
| ATmega328P | Handles low-level vehicle control and sensor readings | ||
| ESP32 | Espressif | Runs the vehicle control firmware | LCSC C701341 |
| ESP32 Dev Module | Espressif | Runs firmware with Bluetooth phone connectivity | |
| PS3/4 | Bluetooth gamepad controls OpenBot robot | ||
| PS4 | Bluetooth gamepad controls OpenBot robot | ||
| X3 | Bluetooth gamepad controls OpenBot robot | ||
| SSD1306 | Adafruit | Provides an optional OLED display output | |
| DRV8870 | Drives the vehicle electric motors | ||
| L298N | Drives the four TT motors | ||
| 18650 battery holder | Holds three batteries and routes power | ||
| CH340G | USB-to-serial bridge on the front sensor board | ||
| CP2102N | USB-to-serial bridge on the front sensor board | ||
| WCH340 | Provides a USB-to-serial interface for programming |