MEVIUS sheet-metal welded quadruped teardown: parts and sources
The 14 parts inside MEVIUS sheet-metal welded quadruped: NUC12WSKi7, C1, Mid-360, t265, AK70-10, C-B628ZZ. Maker and distributor stock for each, with the source document…
University of Tokyo JSK Robotics Laboratory (Kento Kawaharazuka et al.) open-source project · RT Corporation made-to-order · MEVIUS2
| Part | Maker | Use | Source |
|---|---|---|---|
| NUC12WSKi7 | Intel | Runs robot control and vision software | |
| C1 | Tier IV | Captures high dynamic range RGB images | |
| Mid-360 | Livox | Provides LiDAR ranging and environmental mapping | |
| t265 | RealSense | Provides camera images to MEVIUS | |
| AK70-10 | AK | Drives the quadruped's twelve actuated joints | |
| C-B628ZZ | Supports joint shafts with low-friction ball bearings | ||
| RNAF6138N | Supports joint shafts with low-friction needle bearings | ||
| RobStride03 | RobStride | Drives the quadruped robot's moving joints | |
| 3S 6000mAh 11.1V | HRB | Powers the logic system | |
| 6S 3300mAh 22.2V | HRB | Powers actuators and the drive system | |
| G9EN-1-UVD-DC24 | OMRON | Switches and distributes robot power | |
| MBRT40040 | GeneSiC | Provides rectification and protection in power circuit | |
| CAN-USB/2 | ESD | Bridges computer and servo CAN bus | |
| RUBIK LINK V2.0 | Connects the computer to the motor CAN bus |