Connecting to sources…

Manuel 1.0 (open-source human-arm-scale robot arm) teardown: parts and sources

The 22 parts inside Manuel 1.0 (open-source human-arm-scale robot arm): 17x23x4mm bearings, 30x42x7mm bearings, 95x120x13mm bearing, DYNAMIXEL XL430-W250-T, DYNAMIXEL XM…

Personal open-source project by Matthew Weidman (GitHub mattweidman, YouTube channel robothell) · 1.0

PartMakerUseSource
17x23x4mm bearingsThin section small bearings
30x42x7mm bearingsSmall bearings for joints
95x120x13mm bearingMain load bearing support
DYNAMIXEL XL430-W250-TDYNAMIXELDrives wrist joint and gripper
DYNAMIXEL XM430-W350-TDYNAMIXELDrives waist and wrist joints
DYNAMIXEL XM540-W270-TDYNAMIXELDrives shoulder and elbow joints
MGN9CSupports moving parts on the linear rail
MGN9C carriage blockMGN9C carriage block
XL430-W250-TDrives the third wrist joint and gripper
XL430-W350-TDrives the third wrist joint and gripper
XM430-W350-TDrives the waist and two wrist joints
XM540-W270-TDrives the shoulder and elbow joints
EHR-03JSTFemale housing for motor wiring
JST EHR-03JSTEH series 3-pin female housing
JST SEH-001T-P0.6JSTEH socket crimp contact
SEH-001T-P0.6JSTCrimp-on EH socket contactLCSC C263767
SHF-001T-0.8BSJSTCrimp-on SM socket contactLCSC C141769
SMP-03V-BJSTFemale SM housing for cable connectionsLCSC C157908
SMP-03V-BCJSTSM 3-pin female housing for PCBLCSC C157908
SMR-03V-BJSTMale SM housing for cable connectionsLCSC C157907
SYM-001T-P0.6JSTCrimp-on SM pin contactLCSC C246760
U2D2DYNAMIXELConverts computer USB for the actuator bus

Sources