Doly teardown: parts and sources
The 19 parts inside Doly: CM4, E01, R06, E11, E02, H05. Maker and distributor stock for each, with the source documents.
Limitbit Inc. · 3D Maker Edition
| Part | Maker | Use | Source |
|---|---|---|---|
| CM4 | Raspberry Pi | Main compute module for robot control and on-device AI | |
| E01 | Carries CM4 and connects robot electronics | ||
| R06 | Stores robot software and data | ||
| E11 | Provides stereo voice output | ||
| E02 | Controls head LCDs, touch sensors, and camera | ||
| H05 | Filters infrared light entering the camera | ||
| E04 | Hosts ToF proximity sensors and microphones | ||
| E07 | Drives the left wheel assembly | ||
| E08 | Drives the right wheel assembly | ||
| E09 | Positions the left arm | ||
| E10 | Positions the right arm | ||
| E06 | Powers the robot system | ||
| R05 | Charges the robot battery | ||
| C01 | Connects head PCB to the main board | ||
| C02 | Connects head and bumper PCBs | ||
| C03 | Connects main and I/O PCBs | ||
| E05 | Provides I/O connections for robot functions | ||
| E03 | Controls hand RGB LEDs | ||
| E12 | Cools the robot electronics |