How to build TARS-AI (AI recreation of TARS from Interstellar)
Not sold and no official kit (the licence forbids selling prints, kits or complete robots). The wiki's BOM gives Amazon US links and quantities but no prices or total; i…
Not sold and no official kit (the licence forbids selling prints, kits or complete robots). The wiki's BOM gives Amazon US links and quantities but no prices or total; it says only that V3 costs less overall than V2
Common problems
- Discord invitation link is broken, and the server cannot be found. #7
- WebUI startup displays raw HTTP and Socket.IO connection logs. #20
- Upper-arm servo horn is missing from the 3MF model files. #22
- Message streams truncate, repeat responses, and interleave concurrent prints. #24
- Main UI loop crashes from an invalid randrange empty-range error. #38
- Screen power connector is missing from the build documentation. #313
- Fresh builds select an ALSA plugin instead of the USB microphone. #358
Parts
- Raspberry Pi 5 (4 GB or more, 8 GB recommended) with the Active Cooler, and a microSD card of 32 GB or more
- One 5-inch DSI screen: UeeKKoo 1024×600, Hosyond 800×480 or Waveshare 800×480
- PCA9685 16-channel servo driver; 4 MG996R servos (6 with arms), and for the arms 4 MG90S servos, 6 12-inch servo extension cables and 4 10×3 mm magnets
- A 12V 3000 mAh Li-ion battery with charger, an XL4015 buck converter (12V to 6V for the servos), a 6A USB regulator (12V to 5V for the Pi), a rocker switch and 20AWG twin wire; an optional INA260 battery sensor
- A USB sound card with 8Ω 5W speakers, and an OV5647 5 MP camera
- Printed parts: 82 STLs in the Required folder (electronics supports, torso, both legs and optional arms, including alternatives for each screen and Pi support and for legs with or without arms); one M3 screw kit (two with arms), Velcro straps, heat-shrink and spade connectors
Tools
- A 3D printer with at least a 180×180 mm bed; about 1 kg of PETG (1.5 kg with arms, PLA as an alternative), and about 200 g of TPU for optional foot pads
- A small screwdriver (to set the buck converter's output); a soldering iron only for the USB‑C breakout and INA260
- For setup: a computer and microSD reader, with a monitor, keyboard and mouse optional (SSH/VNC work too)
Skills
- Wiring the power harness from the diagram and setting the servo buck converter to 6.2V
- Flashing Raspberry Pi OS (Trixie), editing config.txt for the DSI screen, running Install.sh and setting API keys and config.ini
- Setting servo offsets with the calibration tool (terminal or GUI) and assembling the torso, legs and arms step by step from the wiki
Software
- TARS-AI V3 (OS Amelia): a Python app with plug-in skills (19, including web search, photos, movement, image and music generation, Home Assistant and RetroPie), streaming speech, memory and emotions
- Speech recognition via sherpa-onnx, fastrtc, silero, OpenAI or an external server; speech synthesis via Piper, espeak, silero, ElevenLabs, OpenAI and others; trainable wake words (default “hey tars”)
- A web UI and dashboard (memory graphs, mood tracking, a prompt debugger) and servo calibration and test tools