How to build Raspberry Pi Mouse V3 (Raspberry Pi teaching mobile robot)
10 steps to build Raspberry Pi Mouse V3 (Raspberry Pi teaching mobile robot), with the source documents.
Full kit JP¥71,500 (with a Raspberry Pi 4B, a preinstalled microSD, battery, charger and AC adapter); without a Pi JP¥49,500 (robot and battery only); as shown on RT's product page on 2026‑11‑01, both including tax, with shipping not stated. The page's shop links are dead, and RT's relaunched web store ai.rt-shop.jp does not list it
Buy parts
- Buy the preassembled Raspberry Pi Mouse
Buy the assembled Raspberry Pi Mouse; it is 13 cm long, weighs about 700 g, and can run as soon as it arrives.
- Buy the Raspberry Pi Mouse V3 Full Kit
Buy the complete kit containing the robot body, Raspberry Pi 4B, 16GB microSD with Raspberry Pi OS and device drivers installed, 1000mAh LiPo battery, LiPo charger, AC adapter, and power connector conversion cable.
- Buy the robot without Raspberry Pi
Buy the Raspberry Pi Mouse V3 body and 1000mAh LiPo battery; the charger, AC adapter, and Raspberry Pi are not included.
- Buy the No.2 URG Mount Option Kit
Buy the Raspberry Pi Mouse Option Kit No.2 for the URG mount from RT ROBOT SHOP.
- Buy the No.3 Line Trace Option Kit
Buy the Raspberry Pi Mouse Option Kit No.3 for line tracing from RT ROBOT SHOP.
- Buy the No.4 Web Camera Mount Kit
Buy the Raspberry Pi Mouse Option Kit No.4 for a web camera mount from RT ROBOT SHOP.
- Buy the No.8 Multi-LiDAR Mount Kit
Buy the Raspberry Pi Mouse Option Kit No.8 for a multi-LiDAR mount from RT ROBOT SHOP.
- Purchase the Raspberry Pi Mouse V3
Buy the Raspberry Pi Mouse V3 full kit or the version without a Raspberry Pi from RT ROBOT SHOP.
Use it
- Learn mobile robot and ROS control
Use the robot to learn basic mobile-robot control and how to operate a physical robot with ROS.
- Extend to vision and ranging mapping
Add separately sold option kits to perform image recognition with a camera and create maps with a ranging sensor.
Parts
- Factory-assembled base: two four-phase stepper motors (0.9° basic step angle, 400 steps per revolution) driving the wheels independently, with a pulse counter
- 4 red-LED distance sensors, 3 push buttons, 4 programmable LEDs plus a power status LED, a programmable buzzer
- 3-cell 1000 mAh LiPo battery; 130×100×83 mm, 740 g with battery; about 0.3–0.9 m/s, about 2 kg payload
- Raspberry Pi 4B (in the full kit; your own 3B/3B+ also works with the separately sold No.9 connector) and a 16 GB microSD
- The full kit adds a LiPo charger, AC adapter and power adapter cable; the AC adapter can power the robot in place of the battery
- Options: No.3 line-trace sensor, No.4 webcam mount, No.8 multi-lidar mount (LDS‑01, RPLIDAR A1, URG‑04LX)
Tools
- An HDMI monitor and USB keyboard and mouse (first setup)
- Wired or Wi‑Fi networking to download the driver from GitHub
- If you buy the robot alone, a microSD flashed with Ubuntu Server (20.04/22.04/24.04) or Raspberry Pi OS
- A remote computer running ROS 2 (optional)
Skills
- Linux: enabling SPI and I2C and rebuilding the driver after kernel updates
- Controlling motors, LEDs and the buzzer and reading sensors through device files from the shell, Python or C++
- ROS 2 (raspimouse2 supports Humble, Jazzy and Lyrical): mapping with slam_toolbox and Nav2 navigation (Humble, Jazzy), Gazebo simulation
- Safe charging and discharging of LiPo batteries
Software
- The RaspberryPiMouse device driver (device files such as /dev/rtmotor0 and /dev/rtlightsensor0; the latest master commit, 2025‑10‑03, adds rpi‑6.12 kernel support)
- raspimouse2 ROS 2 node (3.0.0 for Lyrical, 2026‑08‑07; Humble and Jazzy branches too)
- raspimouse_ros2_examples: joystick control, webcam ball tracking, line following, camera line following, IMU direction control
- raspimouse_slam_navigation_ros2 (slam_toolbox plus Nav2, 3.1.0, 2026‑08‑25) and raspimouse_sim (Gazebo Sim)