How to build Panthera-HT open-source 6-axis robot arm: the whole process
85 steps to build Panthera-HT open-source 6-axis robot arm, from buying parts, printing and assembly to software, calibration and training, with the bill of materials, s…
The assembled arm is $1,799 in the official store (store.hightorque.cn, 2026‑11‑03, with no word on tax or shipping). For a self-build, BOM.xlsx lists only part numbers, quantities, materials and Taobao / Tmall links, with no prices or total
Buy parts
- Check the complete bill of materials
View the Panthera-HT_Model repository to obtain the complete bill of materials.
- Purchase joint modules and electronics
Purchase High Torque joint modules and the other electronic components.
- Check the Panthera-HT package contents
Check the package for the arm, 220V-to-24V power adapter, M6*10 cup-head screws, quick-start guide, USB-to-FDCAN debug board, G-clamps, DC-to-XT60 female cable, XT30 cables, terminator, USB-to-Type-C cable, main-arm controller and D405 camera bracket, carton, general-box baseplate, and parameter manual.
- Buy the Panthera-HT Robot
Buy the Panthera-HT six-axis robotic arm platform from the official store.
Print and make
- Prepare the fabrication files
Prepare the sheet-metal fabrication, 3D-printing, and CNC-machining files.
Assemble
- Remove the arm from packaging
Insert both hands into the reserved opening in the packaging foam liner and apply slight force to remove the product.
- Secure the arm to the platform
Place the product on a stable platform and secure it with G-type clamps or the included screws.
- Connect the motor 1 harness
Take out the included XT30 2-2 wiring harness and connect one end to the product's motor No. 1.
- Connect the harness to CAN
Connect the other end of the harness to the 7-channel CAN port on the universal box bottom plate. The main-arm wire is inserted into CAN2, and the red CAN1 port from the arm is connected.
- Connect the cable to the computer
Take out the USB to Type-C cable and connect the USB end to the computer.
- Disable DIP switches and connect Type-C
Toggle all DIP switches on the back of the motherboard down to turn them off, then connect the Type-C port to the Type-C port on the upper part of the universal box motherboard.
- Remove the adapter and connector
Take out the power adapter and its matching connector.
- Connect the DC-to-XT60 adapter
Connect the DC port to the DC-to-XT60 adapter.
- Connect to the three-prong plug
Connect the adapter to the three-prong plug.
- Insert the XT60 plug into the baseplate
Insert the XT60 male plug into the XT60 port on the universal box baseplate.
- Connect the power supply
Connect the power supply and adapter plug to provide power to the product.
- Install All Components per the User Guide
Correctly install and use all components and accessories in accordance with the User Guide. Improper installation and use may pose usage risks.
- Locate the communication board interface
Locate the Type-C port on the right side of the communication board, which is the external communication board interface.
- Install components using the guide
Correctly install and use all components and accessories according to the Usage Guide to avoid risks from improper installation or use.
- Mount the D405 depth camera
The D405 camera consists of an Intel RealSense module D401 and an Intel RealSense vision processor D4 board v4; size 42×42×23mm, weight 60g, depth FOV 87°×58°.
- Assemble the robotic arm
Assemble the mechanical arm according to the Panthera-HT Quick Start Guide A5.
- Provide stable 24V 15A power
Use an adjustable power supply to provide stable 24V 15A power. If the local supply is 220V, the kit's three-pin 220V-to-24V 15A adapter can be used directly.
Software
- Set communication baud rates
Set the CAN baud rate to 1Mbps, the CAN FD baud rate to 5Mbps, and the serial communication baud rate to 4Mbps.
- Configure SDK CANFD channels
Configure up to 7 CANFD information channels through the SDK, with each channel able to control up to 20 motor modules. Use software algorithms to control the overall hardware system and achieve robot posture control.
- Clone the SDK repository
Clone the Panthera-HT SDK repository and enter its directory.
- Install dependencies and run an example
Install the dependencies and run an example program, following the SDK repository's README.
- Configure Ubuntu 22.04 and ROS 2
Use Ubuntu_22.04 as the operating system and ROS 2 as the ROS version.
Calibrate and test
- Inspect Box and Adapter Before Use
Before use, check the universal box and power adapter for damage. Do not use the product if either item is damaged.
- Select internal computing power
Flip both DIP switches 1 and 2 down to the off position so the input supplies the internal system computing power.
- Select external master control power
Turn on both DIP switches 1 and 2 so the input supplies power for the external master control computer.
- Power on the joint modules
Briefly press the modular power switch to turn on the joint module power. The switch light illuminates after it turns on.
- Power off the joint modules
Briefly press the switch button again to turn off the joint module power. The switch light goes out after it turns off.
- Troubleshoot a motor without feedback
The product has 7 motors. If a motor has no feedback, check the following wiring, interfaces, addresses, termination resistor, initialization, and calibration conditions.
- Check power and communication connections
Check whether the power or communication cable is loose, incorrectly plugged in, or has poor contact. Also check for connector aging and terminal oxidation.
- Check interfaces and driver board
Check whether the CAN interface, CAN FD module, or driver board is damaged, and whether wires are broken or internally severed.
- Check communication port and motor addresses
Confirm that the motor is connected to the correct communication port and check whether multiple motor addresses conflict.
- Resolve CAN ID conflicts
Check whether multiple motors use the same ID, causing recognition failure.
- Check CAN bus termination resistors
Confirm that a 120Ω termination resistor is connected at both ends of the CAN bus and is in the correct position.
- Initialize and calibrate the motor
Confirm that the motor has been initialized and calibrated.
- Contact support for persistent faults
If issues are irreparable or recurring, do not disassemble the device because this can affect the warranty. Call 86-18144897433 or contact official technical support on WeChat at GQJD2022.
- Set up a stable operating area
Place the product on a flat, stable surface, keep it within sight, and maintain a safe distance from people, obstacles, complex ground, water, and other objects.
- Inspect the controller and adapter
Before use, inspect the general box and power adapter for damage; do not use the product if the general box power adapter is damaged.
- Dry-clean and fully dry the product
Do not immerse the product interior or power adapter in water or other liquids; wipe the body, camera, and other sensors with a dry cloth and let them dry completely before use.
- Power correctly and respond to faults
Supply power according to the manual; if there is an odor, smoke, heat, discoloration, or deformation, immediately unplug the power adapter and stop using the product.
- Check the six joint ranges
Before the first movement, check the joint ranges: motor 1 is -180° to 180°, motor 2 is 0° to 200°, motor 3 is 0° to 230°, and motor 4 is -90° to 90°.
- Set the baseboard DIP switches
DIP 1 corresponds to the right Type-C port and DIP 2 to the left; both down means internal system compute input, both up means external controller compute input.
- Store long-term with correct battery charge
For long-term storage disconnect the main power, keep the battery at 30%~60%, store at 10℃~35℃ in a dry, ventilated place without strong magnets or corrosive gases.
- Inspect and clean while powered off
Regularly check the exterior for damage from impacts; make sure the product is powered off before cleaning, use mild detergent, avoid strong solvents, and keep the camera lens clean.
- Troubleshoot a motor with no feedback
The robot has seven motors; when one motor gives no feedback, check for loose or disconnected wiring.
- Set motor 7 to zero
Manually adjust motor number 7 until its position is set to zero.
- Set motor 1 to zero
Manually adjust the position of Motor 1 to zero.
- Power on the universal box
Briefly press the universal box button to open the base plate and power on the product, after which development can proceed. Monitor the product status during this period.
Use it
- Place on a Flat, Stable Surface
Place the product on a flat and stable surface to avoid damage from falling.
- Keep Fingers Away From Joints
Do not insert fingers or other objects into the joint to prevent pinching injuries.
- Avoid Humid and Dusty Environments
Avoid placing the product in humid or dusty environments to prevent damage to electronic components.
- Avoid Long High-Temperature or High-Pressure Use
To extend the product's service life, do not use this product in high-temperature or high-pressure environments for extended periods.
- Keep the Product in Sight
When using the product, ensure that it remains within your line of sight.
- Maintain a Safe Distance
The product must maintain a safe distance from people, especially the elderly, weak, sick, disabled, and pregnant, as well as obstacles, complex terrain, bodies of water, and other objects.
- Keep Away From Damp Floors and Rain or Snow
The product is not waterproof. Do not use it on damp floors or in rainy or snowy weather.
- Avoid Gravel and Dusty Environments
The product is not dustproof. Do not use it in gravel or dusty environments.
- Do Not Use in Severe Weather
Do not use the product in severe weather such as fog, snow, rain, lightning, sandstorms, storms, and tornadoes.
- Avoid Electromagnetic Interference
Do not use the product in environments with electromagnetic interference, including high-voltage power transmission lines, high-voltage substations, mobile phone base stations, and television broadcast signal towers.
- Avoid Areas With Many Wireless Devices
Please do not use the product in scenarios where many wireless communication devices are operating.
- Use in a Flat, Open Environment
Controller proficiency varies. To ensure stability, use the product in a flat and open environment.
- Do Not Push or Hit the Product
Do not suddenly push or hit the product forcefully, as this may cause it to fall and be damaged, which is not covered by warranty.
- Use Only by People Aged 14 and Above
The product is only for use by people aged 14 and above.
- Clean Body and Sensors with a Dry Cloth
Do not immerse the product or power adapter in water or other liquids for cleaning. Wipe the body and sensors such as the camera with a dry cloth, and wait until they are completely dry before use.
- Supply Power According to the Manual
Supply power to the product according to the instructions in the manual. Incorrect power supply methods may damage the product.
- Stop Use on Power-Supply Anomalies
During power supply, immediately unplug the power adapter from the product and stop using it if unusual smell, smoke, heating, discoloration, or deformation occurs.
- Move the arm with two people
Do not shake or tilt the arm violently or drop or strike its structure. Two people are recommended when moving it to prevent structural displacement and joint injuries.
- Store the arm in a suitable environment
Store the product in a dry, ventilated environment without strong magnets or corrosive gases, and avoid direct sunlight, high temperature, and high humidity.
- Disconnect the main power before storage
Disconnect the main power supply when the product will not be used for a long time.
- Maintain the recommended battery charge
Keep the battery at 30%~60% charge. The recommended storage temperature is 10℃~35℃ to prevent over-discharge or deterioration of battery cell performance.
- Inspect the exterior regularly
Regularly check whether every part is in good condition and whether external impact has damaged it.
- Turn off the arm before maintenance
Ensure the product is turned off before performing maintenance or cleaning.
- Clean the exterior with mild detergent
Clean the product exterior with mild detergent. Do not use strong solvents.
- Avoid impact during transport
Handle the product carefully during transport and avoid dropping it, as mechanical impact can damage components.
- Place the arm in its natural state
When placing the product, make sure it is in its natural state to avoid stress on the joints.
- Submit and track service requests
For non-human-induced performance failures during normal use within the warranty period, free repairs or parts replacement are available with valid proof of purchase. Submit requests and check progress through the official after-sales platform.
- Protect joints and hazardous environments
Keep fingers and other objects out of the joints, and avoid humid, dusty, high-temperature, high-pressure, severe-weather, electromagnetic-interference, and wireless-device-heavy environments.
- Turn on the joint module power
Short-press the module power switch to power the joint modules on (light turns on); short-press again to turn them off (light goes out).
- Use the communication board external port
The right Type-C port is the communication board's external interface; CAN baud rate is 1Mbps, CANFD 5Mbps, serial 4Mbps.
- Move the robot with two people
Do not shake or tilt the product violently and avoid drops or impacts; two people are recommended when moving it.
- Review the arm parameters
Consult the Panthera-HT Parameter Manual A5 for the arm's basic parameter information.
- Start controlling the robotic arm
Refer to the example code in Panthera-HT_SDK to quickly start controlling the robotic arm.
Parts
- Joint modules (HighTorque planetary series, stall torque): HTDW-5036-02-CNE at joint 1 (36:1, 21 N·m), HTDW-6036-02-DNE at joints 2–3 (36:1, 36 N·m), HTDW-5036-02-DNE at joint 4 (36:1, 21 N·m) and HTDW-4438-30-NE at joints 5–6 (30:1, 10 N·m)
- Gripper: HTDW-3532-02-DNE as motor 7 (32:1, 3.7 N·m), an MGN9 rail and carriages, and flexible TPU fingers modelled on UMI; 0.49 kg with motor, 82 mm maximum stroke, about 1.3 / 8.0 kgf rated / peak grip and <0.15 mm repeatability
- Structure: anodised 5052 aluminium sheet-metal links, CNC-machined 6061 aluminium connectors, PETG-CF prints and ABS-like covers cast in outsourced silicone moulds
- Universal box base plate: 7 CAN FD channels (up to 20 modules each), Type‑C, a modular power switch, an XT60 power input and a cooling fan; a USB-to-FDCAN debug board
- A 220V-to-24V 15A power adapter (XT60) and XT30(2+2) harnesses; the README suggests an adjustable 24V 15A supply for self-builds
- Optional: an Intel RealSense D405 wrist depth camera
Tools
- G-clamps or M6 screws to fix the base to a stable table or optical plate; two people to carry it (parameter manual)
- For a self-build: sheet-metal fabrication, 3-axis CNC, 3D printing and outsourced silicone moulding; SolidWorks 2024 for the sources, or any CAD tool for the STEP files
Skills
- Ubuntu 22.04, conda and Python 3.9–3.12; other systems need the motor SDK built from source with CMake
- CAN FD wiring and zeroing (the quick-start guide has motors 1 and 7 set to zero by hand)
- ROS 2 MoveIt, impedance and gravity-compensation control; LeRobot data collection and policy training
Software
- Panthera-HT_SDK (MIT): C++/Python with position-velocity, five-parameter MIT and torque control, forward and inverse kinematics, gravity and friction compensation, septic-polynomial trajectories, and leader-follower, GELLO, keyboard, gamepad and VR teleoperation examples
- Panthera-HT_ROS2 (MIT): MoveIt driver and Cartesian impedance control
- Panthera-HT_lerobot (MIT): PantheraLeader / PantheraFollower, with data in the LeRobot and Hugging Face format
- Panthera-HT_Host web control app and Panthera-HT_RoboTwin for single- and dual-arm simulated data collection; the Extensions repo has D405 hand-eye calibration and visual-servoing examples