Connecting to sources…

How to build OpenMANIPULATOR-X (RM-X52-TNM)

9 steps to build OpenMANIPULATOR-X (RM-X52-TNM), with the source documents.

Full kit $1,629.09 (robotis.us, 2026‑10‑31, shown in stock, 2–3 week lead time; shipping calculated at checkout, tax not mentioned), without power supply or controller: the DYNAMIXEL Starter Set at $68.66 or an OpenCR1.0 at $247.14, and the Base Plate‑02 at $206.66, are extra; a frame set without servos is $314.76. No self-sourced BOM total is given

Bill of materials · Part Lists

PartQty
Powers · SMPS 12V5A1
Boards · OpenCR1
. · U2D21
. · U2D2 Power Hub Board1
Plate · Base Plate-021
. · LINK ROD2
. · FLANGE BUSH4
. · CRANK ARM1
. · RAIL BLOCK2
. · FR12-S101-K1
. · FR12-S102-K2
. · FR12-H101-K2
. · FR12-H104-K1
Actuators · XM430-W350-T5
Cables · CABLE-X3P-1001
. · CABLE-X3P-1802
. · CABLE-X3P-2402
Tools · Screw Driver1
. · Wrench-1.51
. · Wrench-2.01
. · Wrench-2.51
Miscellaneous · X-SP24
. · NUT-M2.516
. · NUT-M34
. · FHS-M2.5x1412
. · WB-M2x338
. · WB-M2x44
. · WB-M2.5x44
. · WB-M2.5x68
. · WB-M2.5x816
. · WB-M2.5x124
. · WB-M2.5x174
. · WB-M2.5x204
. · WB-M3x104
. · DC12-IDLER3
. · DC12-IDLER-CAP3
. · DC12-P-BEARING3
. · RUBBER PAD2

Buy parts

  • Prepare DYNAMIXEL and Printed Parts

    OpenMANIPULATOR-X RM-X52-TNM is composed of DYNAMIXEL-X series and 3D printing parts. Use the linked DYNAMIXEL-X series products and 3D printing parts.

Print and make

  • Download and print OpenMANIPULATOR-X parts

    Obtain the 3D CAD files for OpenMANIPULATOR-X from Onshape or Thingiverse; the parts can be modified and printed.

Assemble

  • Assemble the robot using the manual

    OpenMANIPULATOR-X is delivered as unassembled parts in the box. Assemble it by following the instructions and referring to the assembly video.

  • Build the Selected Arm Configuration

    Arrange the DYNAMIXEL joints using the daisy chain method, and add or remove joints as needed. Build one of the seven types: Chain, SCARA, Link, Planar, Delta, Stewart, or Linear.

Software

  • Define the link1 URDF link

    Define a `<link>` named `${prefix}link1` in URDF with `<visual>`, `<collision>`, and `<inertial>` elements. Use `link1.stl` at a 0.001 scale for the visual and collision models, and set the mass to 7.9119962e-02 with the stated inertia tensor.

  • Define the joint1 revolute joint

    Define the revolute joint `${prefix}joint1}` with `${prefix}link1` as the parent and `${prefix}link2` as the child. Set the origin to `xyz="0.012 0.0 0.017"`, use the Z axis, set velocity to 4.8, effort to 1, the range to `${-pi}` through `${pi}`, and damping to 0.1.

  • Add a Prismatic Joint

    Add gripper_left_joint to the end-effector model as a prismatic joint that moves along the Y axis. Limit the movement to -0.010 m through 0.019 m, with velocity 4.8, effort 1, and damping 0.1.

  • Use a Fixed Joint

    Add end_effector_joint with type fixed to connect end_effector_link to link5. The links have no relative motion, and the origin offset is x=0.126 m, y=0 m, and z=0 m.

  • Run OpenCR Control Examples

    Use OpenCR to run forward and inverse kinematics examples and profile control examples. The document states that OpenCR's computing power and real-time controllability support these examples.

Common problems

  • Dynamixel controller crashes or segfaults during startup #30 #39
  • ROS 2 Dynamixel read/write failures prevent manipulator control #205 #333
  • OpenCR or U2D2 cannot reliably control the manipulator #82 #111
  • Default four-DoF inverse kinematics solver often fails on target poses #138 #192

Parts

  • Five DYNAMIXEL XM430‑W350‑T servos (4.1 N·m stall and 46 rpm no-load at 12V)
  • Dedicated plastic frames, FR12 brackets, three HN12‑I101 sets, five X3P cables, bolts and nuts, and fingertip rubber pads (store package list)
  • Specs: 4 joints + gripper, 500 g payload, repeatability < 0.2 mm, 380 mm reach, 20–75 mm gripper stroke, 0.70 kg, 12V supply
  • Bought separately: a 12V 5A supply with U2D2 and power hub (DYNAMIXEL Starter Set) or an OpenCR; the Base Plate‑02 aluminium base (300×300×10 mm)
  • Optional: a RealSense D435/D435i camera on a self-printed STL mount (e-Manual perception page)

Tools

  • A Phillips screwdriver and three Allen wrenches come in the kit (store page)
  • A PC with Ubuntu and ROS 2 Jazzy or Humble, or the Docker container shipped in the repo
  • A 3D printer for self-made parts (Onshape or Thingiverse files)

Skills

  • ROS 2, ros2_control and MoveIt 2
  • Configuring the servos in DYNAMIXEL Wizard 2.0
  • Optional: Arduino (standalone OpenCR) and Processing

Software

  • open_manipulator ROS 2 packages (latest 5.1.4, 2026‑10‑19; jazzy and humble branches): ros2_control controllers, MoveIt 2, MoveIt Servo keyboard teleoperation, a GUI and gravity compensation
  • Gazebo simulation and MuJoCo models (added in 5.1.3)
  • The OpenManipulator Arduino library for OpenCR and the DYNAMIXEL SDK

Documents