How to build NanoLoong (small teaching biped, from OpenTinker V2)
8 steps to build NanoLoong (small teaching biped, from OpenTinker V2), with the source documents.
Not sold and no kit. The README puts the whole robot under CN¥15,000 (the creator's estimate, without saying what it covers); the itemised BOM is a Feishu document that redirects to a login page and was not read
Buy parts
- Get the BOM List
Use the Feishu link in the document to get the bill of materials list.
Print and make
- Get Nano's CAD design
Open the linked document to obtain Nano's CAD design.
- Get Nano's PCB design
Open the linked document to obtain Nano's PCB design.
Assemble
- Review the Robot Project Overview
Open the linked build guide to review the overview of the robot project.
- Read the Robot Assembly Guide
Open the linked assembly guide for an introduction to assembling the robot project.
Software
- Update Nano first release version
Update to Nano's first release version, then try the two trained policies.
- Install the Xiaozhi AI Module
Install the Xiaozhi AI module on the robot to implement large language model functions. Use the linked xiaozhi-esp32 repository as the reference.
- Run TVM Policies on Odroid C4
Use the software in the repository to run TVM policies on the onboard Odroid C4 computer. Open the linked software guide for the related instructions.
Parts
- Brushless joint motors (Damiao, per the designer's video), five joints per leg
- An Odroid C4 on-board computer (the prints also include a Jetson mount)
- OmniBotHub main, power and extension-CAN boards (Altium files and BOMs)
- Carbon-fibre cut parts: body plates, thighs, shanks, ankle plates and the controller support; machined parts: two hip pieces and the thigh parts
- 3D prints: rubber-coated feet, thigh and shank structures, shells and back cover, neck and head, battery and router mounts
- The ESP32 remote OmniBotTele (board and housing files); an optional XiaoZhi AI module
Tools
- A 3D printer (the designer uses a Bambu P1)
- Carbon-fibre plate cutting and metal machining (outsourced, from the repo's STEP files)
- Board fabrication and assembly (Altium files)
- A GPU computer for policy training (Isaac Gym)
Skills
- Mechanical assembly and brushless motor setup
- RL training in Isaac Gym, sim2sim checks in MuJoCo, and exporting to ONNX / TVM for the Odroid C4
- Linux and building the C++ control program
Software
- OmniBotCtrl: sim2sim and NP3O / PPO training code, trained policies, and pt2onnx and pt2tvm export scripts
- OmniBotHub: the Linux control and navigation programs on the Odroid, with gait, hardware and robot parameter files
- OmniBotHmi: the Windows host program; OmniBotTele: the ESP32 remote's firmware
- The TinkerV2 URDF (with Gazebo and RViz launch files)