Connecting to sources…

How to build MeArm (pocket-sized robot arm)

13 steps to build MeArm (pocket-sized robot arm), with the source documents.

MeArm Maker Kit from £46.99 (no controller or power supply), MeArm WiFi kit £69.99, micro:bit kit £69.99 (MeArm's official store shop.mearm.com, 2026‑11‑01, shown in GBP with taxes included; shipping calculated at checkout, and a banner promises free worldwide shipping from the UK; the store converts by region, and the site's collector read SGD 83.00 the same day)

Buy parts

  • Choose the Maker Kit

    The MeArm Maker Kit includes laser-cut acrylic parts, four micro servos, fixings, and assembly instructions, but no controller.

  • Prepare a PWM-capable controller

    Use your own Arduino, Raspberry Pi, or another board with PWM output capability.

  • Choose a controller-included kit

    A controller-included kit bundles the MeArm with a matched Arduino-compatible controller.

  • Browse and order a MeArm kit

    Open the MeArm Kits collection, browse all kits, and choose one that fits your build.

  • Buy a MeArm Robot Kit

    Buy a kit from the MeArm website; the kits are manufactured and shipped from the UK.

Print and make

  • Laser Cut the 3mm DXF Files

    Select the required version in the repository and use the 3mm laser-cut DXF files in that version folder.

  • Get the MeArm CAD files

    Get the hardware design files in DXF, SVG, and STEP formats from the mearm/mearm repository.

Software

  • Set Up the Arduino Controller

    Use the Arduino library with inverse kinematics. The hardware can be the V1.0 Brains Board using a Pro Mini Clone or the V2.0 MeArm Wifi using an ESP8266.

  • Set Up the Raspberry Pi Controller

    Use the node.js control software in mearm-js with the V1.0 MeArm Pi PCB.

  • Set Up the micro:bit Controller

    Use pxt to add MeArm blocks to MakeCode, or use the hosted MakeCode project on microbit.org; PCB versions are available.

  • Set Up the BeagleBone Black Controller

    Use the BeagleBone Black software hosted by Bob Stone.

  • Set Up the Espruino Controller

    Use the Espruino JavaScript hardware software with MeArm examples.

  • Set Up the SparkCore Controller

    Use the SparkCore software, which includes features such as S-Curve movements.

Common problems

  • Inverse kinematics causes unexpected joint coupling or reversed movement. #3 #4
  • Build instructions omit acrylic thickness and hardware specifications. #7
  • DXF files import poorly into OpenSCAD, hindering part editing. #8

Parts

  • 3 mm laser-cut acrylic parts (the cut-your-own kit supplies DXF files only, to cut or 3D print yourself)
  • 4 metal-gear servos
  • Custom PCB and connecting cable; socket-head screws, nuts, rubber feet, googly eyes and a hex key
  • Controller (bring your own with the Maker Kit): the MeArm WiFi board (ESP8266, on-board joysticks, pre-assembled) with a 4×AA battery box, or the micro:bit or Raspberry Pi Pico boards

Tools

  • Hex key (included; the WiFi kit calls it the only tool required)
  • Small Phillips screwdriver (also listed on the WiFi kit page)
  • A PC or Mac and a micro-USB cable for programming; four AA batteries for the WiFi kit
  • A laser cutter (3 mm sheet) or 3D printer for the cut-your-own kit

Skills

  • micro:bit MakeCode blocks
  • Arduino C++ (the MeArm-Arduino library includes inverse kinematics); the WiFi kit also takes MicroPython and LUA
  • MicroPython on the Raspberry Pi Pico; Node.js on a Raspberry Pi (mearm-js)

Software

  • MeArm-Arduino: standard and inverse-kinematics control library, also for same-geometry arms such as the EEZYBot
  • pxt-microbit-mearm: MakeCode block extension
  • mearm-pico: Raspberry Pi Pico control code
  • mearm-gui and mearm-controller: desktop and browser control over serial

Documents