Connecting to sources…

How to build LEAP ROS2 (low-cost open ROS 2 learning car: LEAP_ROS / LEAP_ROS_MAX)

5 steps to build LEAP ROS2 (low-cost open ROS 2 learning car: LEAP_ROS / LEAP_ROS_MAX), with the source documents.

The creator's reference build cost in the README: about CN¥200 for LEAP_ROS and about CN¥600 for LEAP_ROS_MAX, varying with part choice, sourcing and quantity; it does not say whether a host computer or main board is included. The Taobao shop sells assembled PCBs, loose parts and finished robots (not read; prices unverified)

Buy parts

  • Choose a Robot Configuration

    Choose LEAP_ROS or LEAP_ROS_MAX according to your needs and budget, then check the hardware documentation for the selected configuration.

  • Obtain Source Code and Packages

    Open the microcontroller source repository for the selected configuration and obtain the WiFi video streaming, ROS package, and AI large-model assistant code as needed.

  • Buy the Robot or Components from the Author

    Contact the author directly to buy an assembled PCB, loose components, accessories, or a finished robot, saving time on fabrication, assembly, procurement, and soldering.

  • Choose a Purchase Link by Configuration

    Select the corresponding purchase link for the required configuration; actual prices and available options are subject to the product pages.

Software

  • Build, Flash, and Run

    Complete compilation, flashing, and operation according to each source repository's README or documentation.

Parts

  • The LEAP_ROS driver board: ESP32-S3-WROOM-1U-N4, LSM6DS3TR-C IMU, two AT8236 motor drivers, CH340K USB serial, MP2225 buck and AMS1117 regulator (BOM with LCSC part numbers)
  • The LEAP_CAM camera board: an ESP32-S3-WROOM-1U-N4 with a camera (schematic and BOM published)
  • A two-wheel differential base (65 mm wheels, encoder motors) or a four-wheel mecanum base (MAX)
  • A Camsense lidar, HC-SR04 ultrasonic sensor, servo, battery and I²C gamepad (supported by the firmware)
  • A 3D-printed shell: two STLs, top cover and body
  • The ROS 2 host: a PC virtual machine, or a Rockchip main board (MAX and the version with a main board)

Tools

  • Ordering and assembling the boards yourself (JLC EDA files), or buying assembled PCBs
  • A soldering iron and soldering tools, a 3D printer
  • A PC to run the ROS 2 virtual-machine image

Skills

  • Soldering and hardware assembly
  • Building and flashing the ESP32-S3 firmware with ESP-IDF, or flashing it from the creator's web tool
  • ROS 2 basics: building the workspace with colcon, the micro-ROS Agent, mapping and Nav2 navigation

Software

  • leap_ros_mcu_driver v2.1 and leap_ros_max_mcu_driver: ESP32-S3 firmware (motor PID, odometry, IMU, lidar, ultrasonic, battery) with micro-ROS and MAVLink
  • leap_ros_ws (GPL‑2.0): base node and TF, URDF, Cartographer and gmapping mapping, Nav2 navigation, OpenCV samples, an Astra camera driver
  • esp32_s3_wifi_camera: provisioning page, MJPEG stream and UDP discovery
  • voice_assistant_client: a Chinese voice assistant with the wake phrase “Ni hao Xiaoyun” that can send ROS 2 navigation goals through MCP

Documents