Connecting to sources…

How to build InMoov: the whole process

51 steps to build InMoov, from buying parts, printing and assembly to software, calibration and training, with the bill of materials, shop links and the official sources.

No total is published. The BOM page (marked updated 2016‑05‑04) lists some reference prices: two Arduino Megas €80, ten HK15298B hand servos €180, two MG996R wrist servos €22, eight HS805BB arm servos €240, a 6V 12Ah battery and charger €35; other servos, the computer, sensors and filament are not priced

Buy parts

  • Obtain a 3D printer

    Obtain a 3D printer.

  • Obtain two Arduino Mega boards

    Obtain two Arduino Mega boards, listed at 80 euros from eBay.

  • Note the default Arduino configuration

    The default is one Uno and one Mega; the legs and waist are yet to come.

  • Obtain M3x20mm Allen screws

    Obtain about 50 M3x20mm countersunk Allen screws.

  • Obtain M4x20mm Allen screws

    Obtain about 50 M4x20mm countersunk Allen screws.

  • Obtain M8x100mm Allen screws

    Obtain about 15 M8x100mm countersunk Allen screws.

  • Obtain M3x12mm screws for small servos

    Obtain about 100 M3x12mm Phillips flat-head wood screws for small servos.

  • Obtain M4x20mm screws for big servos

    Obtain about 50 M4x20mm Phillips flat-head wood screws for big servos.

  • Obtain small mechanism screws

    Obtain small screws for the eye mechanism, jaw mechanism, and fixing the pistons on the small servos; the author used the screws delivered with the servos.

  • Obtain ten HK15298B servos

    Obtain 10 HK15298B servos for the left and right hands and forearms; listed at 180 euros from Hobbyking.

  • Obtain two MG996R servos

    Obtain 2 MG996R servos for the rotational wrist; listed at 22 euros from eBay.

  • Obtain 0.8mm braided fishing line

    Obtain 0.8mm braided or fishing line rated at 200LB; listed at 10 euros from eBay.

  • Obtain miscellaneous bolts

    Obtain miscellaneous bolts from a hardware store; listed at 10 euros.

  • Obtain natural ABS filament

    Obtain 1500gr of natural ABS; listed at 70 euros from Orbi-Tech, with 4kg available if starting printing.

  • Obtain ten extension springs

    Obtain 10 extension springs with a 0.51mm diameter and 1cm length (13/64″x13/16″).

  • Obtain arm and shoulder components

    Obtain 8 Hitec HS805BB servos, miscellaneous bolts, and 1500 g of black, yellow, or natural ABS. The document recommends servos with greater torque and faster speed.

  • Obtain head and torso components

    Obtain the head servos, jaw and neck mechanisms, eye mechanisms, cameras, about 4 kg of natural ABS, 1500 g of natural ABS, 200LB line, battery, speakers, amplifier, PIR sensor, and cables. Camera choices include a dismantled Hercules HD or Microsoft LifeCam3000, or an OAK-D-Lite.

  • Prepare stomach servos

    Prepare 2 Hitec HS805BB servos for the high stomach; prepare 2 Hitec HS805BB or HK15338 servos for the mid stomach.

  • Prepare MRL-controlled devices

    Prepare an 8-port USB 3.0 hub, OAK D-Lite, 2 Arduino Mega boards, 2 Nervo Boards, 1 Arduino Nano, 3 NeoPixels, 2 HC-SR04 sensors, 1 PIR sensor, 10 finger pressure sensors, 2 Hercules webcams, USB sound card, Logitech H600 wireless headset, 2 10-watt speakers, and 60A power supply.

  • Evaluate the Venue 8 Pro alternative

    Consider the untested Venue 8 Pro 5000 (5855) as an alternative tablet. It should fit according to its stated dimensions, but some users report being unable to find an OTG cable for charging and data transfer.

  • Evaluate the Jumper EZpad Mini3 alternative

    Consider the untested Jumper EZpad Mini3 Windows 10 8.0 inch 2GB/32GB as an alternative tablet. It has separate charging and USB 3.0, so it does not need an OTG+charging cable, and it should fit in the back of the robot.

  • Choose a compatible 8-inch Windows tablet

    The candidates are the Insignia 8-inch 32GB tablet, KOCASO 8-inch Windows 10 HD tablet, Chuwi Hi8 Pro 8-inch IPS Windows 10 tablet, and NUVISION 8-inch Full HD tablet; the KOCASO and NUVISION are too small and require a printed adapter.

  • Prepare a battery-powered Kinect 360

    Prepare a Kinect 360 and 10 AA rechargeable batteries rated at 1.2 V and 2500 mAh.

  • Avoid the abandoned Arm option

    Do not use the listed touchscreen, Odroid U3, Odroid battery, mini Bluetooth keyboard, storage card, BIOS backup battery, processor fan, wireless dongle, Bluetooth dongle, or HDMI cable option; testing found the Arm processor too slow to obtain a correct camera FPS.

  • Choose preferred hand servos

    Choose a hand servo from JX PDI-6221MG, JX PDI-6225MG-300, HK15298B, HK15298, MG996R, MG946R, or MG995; the JX PDI-6225MG-300 is for the i2 Hand.

  • Evaluate alternative hand servos

    Evaluate TGY-5521MDHV, RS-550MGC-HV, HS-311, or XQ-S4020D; the document says they should fit the hand.

  • Evaluate upper-body alternative servos

    Evaluate JX Servo PDI-HV2060MG, Savöx SV-0235MG, TS-80 Tower Hobbies giant scale, CYS model S8218, HK15338, HS5805MG, FS6535M, or Ds5160 SSG for the bicep, shoulder, and torso.

  • Evaluate alternative eye servos

    Evaluate Towerpro SG91, TowerPro SG92R, or JX PDI-1109MG for the eyes.

  • Choose a stomach servo

Assemble

  • Install stomach servos

    Install 2 Hitec HS805BB in the high stomach and 2 Hitec HS805BB or HK15338 in the mid stomach.

  • Connect Nervo board ribbons

    Connect the ribbons at the specified lengths: 10cm from the Nervo board to the neck, 55cm to the head, 75cm to the arm, 90cm to the hand, 120cm to the finger sensors, and 30cm to the stomach.

  • Ensure sufficient hub power

    Without the powerbank, power the hub with a supply capable of delivering at least 5V 4A. The document states that each of the connected USB devices may require 500mAh.

Software

  • Install Java 17.0.20 or Newer

    Running MyRobotLab requires the JRE (Java Runtime Environment). Java 21 and Java 25 are also supported.

  • Download Latest Nixie 1.1.X

    Download the myrobotlab.zip file listed in the document.

  • Unzip and Start MyRobotLab

    Unzip myrobtlab.zip into a new folder, then start the appropriate script.

  • Launch on Linux or MacOS

    Run the script; the first execution automatically installs all services and their dependencies, then launches MyRobotLab, which can take a long time depending on internet speed. Later launches skip installation; if a browser does not open automatically, visit http://localhost:8888 for the web user interface.

  • Launch on Windows

    Run the batch script; the first execution automatically installs all services and their dependencies, then launches MyRobotLab, which can take a long time depending on internet speed. Later launches skip installation; if a browser does not open automatically, visit http://localhost:8888 for the web user interface.

  • Build and run with Docker

    Build the MyRobotLab image and run the WebGui on port 8888. The image build runs a full service `--install`, so the container is ready without a first-boot dependency download; the build needs network access and can take a while.

  • Review Docker device configuration

    Read doc/docker.md for Linux device access, serial and webcam passthrough with Windows Docker Desktop, Compose, and mounting a custom InMoov configuration.

  • Send a Runtime Connection Message

    Use a minimal message with name runtime and method connect, passing main.myrobotlab.org:8888 as the connection data.

  • Use the Path API

    Construct a path from the service name, method name, and JSON parameters. Parameters are JSON encoded and converted to their correct types when the method is invoked, and the response is returned as a JSON object.

  • Call Services Through REST

    Call runtime or Arduino services through REST requests, with parameters placed in the path after the method name.

  • Use the Same Paths in the CLI

    Use exactly the same paths in the command-line interface as in the REST requests.

  • Establish a WebSocket Connection

    Connect to the local service using the provided WebSocket URL, supplying connection information through the user, pwd, session_id, and id parameters.

  • Subscribe to Runtime Describe

    After two myrobotlab instances connect, the first message adds a describe subscription to the other process's runtime, and the second message sends a describe request.

  • Install the NUC operating systems

    Install Windows 10 Pro and Linux Ubuntu on the NUC; connect the Lenovo Thinkpad8 tablet to the NUC through a hotspot and use it as the wireless control screen.

  • Connect and configure MRL devices

    Connect the listed devices to the NUC through the USB 3.0 hub and control them in MRL; the fixed-focus OAK D-Lite is not yet fully supported in MRL.

  • Configure the tablet operating system

    Run the tablet under Windows 8 or Windows 10, or configure it to run with Linux.

Calibrate and test

  • Configure the robot power supply

    Use one 6V 12Ah battery with a 6V 1.5A charger, or a 6V 60A switching power supply; if unavailable, use an adjustable 5V 50A supply set to 6V. The document shows an example adjusting 5V to 7.5V.

  • Set servo limits in software

    Set a Min and Max for the selected servo in the software because its rotation range varies.

Use it

  • Check and use the keyboard

    Test the keyboard; its connection is occasionally lost but reconnects automatically.

Parts

  • Servos (BOM by section): hands and forearms 12 (HK15298B ×10, MG996R ×2), arms and shoulders 8 (HS805BB), head, neck and eyes 7, stomach 4
  • i2 hand: six JX PDI‑6225MG 300° servos and five Hall sensors per hand; i2 head: 15 JX PDI‑1109MG + 2 JX PDI‑6221MG, a PCA9685 and a silicone skin
  • Two Arduino Megas, two Nervo Boards, an Arduino Nano, NeoPixels
  • 6V 60A switching supply or a 6V 12Ah battery, two 10 W speakers and a small amplifier
  • 0.8 mm 200 lb braided fishing line (finger tendons), springs, M3/M4/M8 screws

Tools

  • A 3D printer with at least 12×12×12 cm of build area, ABS preferred (PLA works); large leg parts exceed it and the i2 head moulds need a 220×220 mm bed
  • Soldering tools (the Nervo Board comes unsoldered)
  • Acetone (to glue finger covers); the i2 head needs Smooth‑On Ecoflex 00‑10 silicone and release agent

Skills

  • Arduino, servo calibration and wiring
  • MyRobotLab with Python scripting and gesture creation; ROS is possible via community projects
  • The site says no particular skills are needed and suggests starting with the Finger Starter

Software

  • MyRobotLab (Java, Apache‑2.0, Nixie releases) and the InMoov2 service
  • Arduino sketches and minimal MyRobotLab scripts for each body section on the site
  • Community ROS / ROS 2 projects (inmoov_ros, Inmoov_ROS2)

Documents