How to build Tobi ESP32 Desktop Robot
7 steps to build Tobi ESP32 Desktop Robot, with the source documents.
Tobi ESP32 Desktop Robot is a compact ESP32-based desktop companion featuring animated OLED eyes and capacitive touch interaction. The repository provides firmware, wiring and schematic information, a component list, and printable enclosure files.
Print and make
- Find All Printable Parts
All printable parts are available in the 3d-models/ directory.
- Use the Recommended Print Settings
Use PLA filament, a 0.2 mm layer height, and 15–20% infill.
Assemble
- Find the Hardware Diagrams
The schematics and wiring diagrams are located in the hardware/ directory.
Software
- Clone the Robot Repository
Clone the Tobi ESP32 robot repository from GitHub.
- Open the Arduino Firmware
Open the Arduino project located in the firmware/ directory.
- Install the Required Libraries
Install the Adafruit GFX, Adafruit SSD1306, and Wire libraries in the Arduino environment.
- Upload the ESP32 Firmware
Select the ESP32 board in the Arduino IDE, then upload the firmware.