Connecting to sources…

How to build PLEN2: the whole process

17 steps to build PLEN2, from buying parts, printing and assembly to software, calibration and training, with the bill of materials, shop links and the official sources.

PLEN2 is a printable open-source humanoid robot. The repository provides STL files for printing and assembly, Arduino firmware, motion data, and links for control boards, servo motors, and assembly instructions.

Buy parts

  • Download the Robot Repository

    Download the PLEN2 repository archive from GitHub.

  • Get Control Boards and Servos

    Get control boards and servo motors using the PLEN shop's “Buy all!” link.

  • Get a compatible Arduino board

    Buy a compatible board from the official PLEN shop, or create an Arduino/Genuino Micro (Atmega32u4) compatible board yourself.

Print and make

  • Print All STL Files

    Print all *.stl files in the repository's “/stl/” directory; use the Print Details link for printing specifications.

Assemble

  • Assemble the Printed Parts

    Assemble all the printed parts using the Assembling Instructions link.

Software

  • Download and install Arduino IDE

    Download and install Arduino IDE from arduino.cc; choose your environment, then click the “JUST DOWNLOAD” button.

  • Download the firmware repository

    Download the master branch archive of the PLEN Firmware Arduino repository from the provided link.

  • Open the firmware sketch

    Open firmware.ino from the repository’s firmware directory using the Arduino IDE.

  • Upload firmware to the board

    After connecting the board, click the upload button, which looks like a right arrow, in the Arduino IDE.

  • Install the Arduino Firmware

    Install the firmware located in the repository's “/arduino/firmware/” directory.

Calibrate and test

  • Configure Joint Home Positions

    Use PLEN Utils to configure the home positions of the joints.

Data and training

  • Write All Robot Motions

    Create motions in the “/motions/*/” directories and use PLEN Utils.

Use it

  • Run PLEN's Hello World

    Start the robot and run the “Hello, world where PLEN is!” motion.

  • Let PLEN Move as You Like

    Open the Motion Editor to make PLEN move the way you like.

  • Learn Creativity, Logic, and Programming

    Open Scenography to learn about creativity thinking, structuring logics, or programming.

  • Communicate with Other Users

    Open the forum to communicate with other users.

  • Get More Details About PLEN

    Open the PLEN Wiki to get more details about PLEN.

Common problems

  • Mobile control disconnects frequently, and the robot falls while moving #3
  • Control board and head board specifications are difficult to find #6
  • ESP8266 firmware installation and communication setup lack clear guidance #5

Documents