Connecting to sources…

How to build Airship: the whole process

12 steps to build Airship, from buying parts, printing and assembly to software, calibration and training, with the bill of materials, shop links and the official source…

A low-cost, open-source robotic airship for education and research. The repository provides CAD and 3D printing files for the gondola, an assembly guide and bill of materials, and a ROS interface for flight control and path following.

Buy parts

  • Review the required components

    Open Bill_of_Materials.xlsx to view the components required to assemble the airship, along with product numbers, prices, and reseller links.

  • Buy the airship gondola components

    Acquire a Raspberry Pi Zero W, a single-cell 500 mAh Li-Ion battery, a step-up voltage regulator, motor drivers, three 7x16 mm DC motors, three 57x20 mm propeller units, and a camera module. The gondola components cost 90 USD, or 54 USD when the camera module is not required.

Print and make

  • Print the modular gondola frame

    3D print the physical gondola frame, including detachable gondola legs and rotor brackets. Use the modular construction so components can be modified and replaced.

Assemble

  • Connect the motor drivers

    Connect the motor drivers directly to the Raspberry Pi GPIO. They may be soldered directly to the pins or connected through a suitable pin header for easier replacement.

  • Connect the motor power

    Supply motor power directly from the battery using the appropriate pins on the step-up voltage regulator.

  • Assemble the gondola and actuators

    Assemble the gondola around the Raspberry Pi Zero W, battery, step-up voltage regulator, motor drivers, three DC motors, three propeller units, and camera module. Incorporate the detachable legs and rotor brackets into the modular frame.

  • Attach the gondola to the envelope

    Use Velcro to attach the assembled gondola to the chosen envelope.

Software

  • Configure the Raspberry Pi control system

    Run a Lite version of the Raspbian Stretch operating system on the Raspberry Pi Zero W control and communication unit. Rotor speeds can be controlled by onboard logic or manually through an SSH wireless connection or an appropriately developed ROS package.

  • Run pigpio_setter.py on the Raspberry Pi

    The package relies on the pigpio library and the vicon_bridge ROS package. Run the pigpio_setter.py node on the Raspberry Pi; the other nodes are closed-loop flight controller examples.

Calibrate and test

  • Control and check rotor speeds

    Control rotor speeds with onboard logic or manually through a wireless SSH connection and the ROS package.

Data and training

  • Run the path-following proof of concept

    Run a simple path-following experiment to verify that the system can attain the desired heading and altitude configuration.

Use it

  • Use the airship for education and research

    Use the open-source robotic airship platform for a variety of education and research-oriented applications.

Documents