Connecting to sources…

How to build VerhoBot

13 steps to build VerhoBot, with the source documents.

VerhoBot is a compact rail-mounted curtain robot that opens and closes existing curtains automatically or manually using an ESP32. The repository provides printable enclosure models, an electronics list, a schematic, and details of the firmware features and operation.

Calibrate and test

  • Configure the first boot

    On first boot, connect to VerhoBot-Setup and open the dashboard at 192.168.4.1. Click ⚙, enter the WiFi and schedule, save, and reboot.

  • Confirm the restart after saving

    The robot restarts automatically after saving and should join the home WiFi. The disappearance of VerhoBot-Setup is expected because it is trying to join the real WiFi.

  • Reconnect to the setup network

    If it does not appear on the network within a minute or two, reconnect to VerhoBot-Setup and visit /setup again to correct the credentials.

  • Calibrate the curtain position

    Mount the robot on the actual curtain rail and run it fully open and fully closed once. Then use the “set as fully open” and “set as fully closed” dashboard buttons so the tracked position matches reality.

Use it

  • Verify normal operation

    The robot connects to the home WiFi, synchronizes the time, and then sleeps.

  • Test a scheduled wake

    At the scheduled time, the robot moves the curtain, starts the web server, stays awake for 60 s, and then sleeps again.

  • Test a button wake

    Pressing the button toggles the curtain, starts the web server, keeps the robot awake for 60 s, and then returns it to sleep.

  • Open the full dashboard

    During the 60-second awake window, open a browser and visit the device IP shown in Serial. The full dashboard lets you control the curtain and check telemetry.

  • Confirm automatic deep sleep

    After 60 s without activity, the robot returns to deep sleep.

  • Find the robot IP address

    Look for “verhobot” or a similar name in the router’s connected-devices list, or use a phone WiFi scanner app or the router admin page. There is no verhobot.local mDNS support yet.

  • Check the schedule and countdown

    Open the dashboard at the discovered IP address. The schedule card should show the configured open and close times and a live countdown to the next action.

  • Mount and verify unattended operation

    Mount the robot and let it run unattended. Check back around the first scheduled open or close time to confirm that the curtain moves as expected.

  • Monitor battery life

    For the first few days, watch the battery level on the dashboard to learn how long the robot lasts between charges.

Documents